How to Service an HVAC Pressure Switch on 2009 Dodge Journey?

First disconnect and isolate the negative battery cable to service the front HVAC pressure switch. Then remove the wire harness connector from the HVAC pressure switch on the A/C liquid line at the right front corner of the engine compartment. Next, pull the HVAC pressure switch from the A/C liquid line and throw the O ring seal. It is necessary, therefore, to remember that you do not need to discharge the refrigerant system for the replacement. Always follow warnings and cautions that apply to avoid serious injury.

OEM 2009 Dodge Journey HVAC Pressure Switch

Air Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 HVAC Pressure Switch found

View related parts
2009 Dodge Journey Pressure Switch Part Number: 5174039AB
$118.97 MSRP: $175.00
You Save: $56.03 (33%)
Product Specifications
- Other Name: Valve - A/C Pressure Transducer; Refrigerant, HVAC, Compressor, Trinary Switches; Pressure Transducer; Includes O-Ring and Item #4; Discharge Line Valve.
- Replaces: 5175684AA, 5189363AA, 5096084AA, 5174039AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.1 x 1.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174039AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Journey Submodels:
- AVP, Base, Crew, Crossroad, Express, Limited, Lux, Mainstreet, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

2009 Dodge Journey HVAC Pressure Switch Parts and Q&A

Q: How to Service an HVAC Pressure Switch on 2009 Dodge Journey?
A: First disconnect and isolate the negative battery cable to service the front HVAC pressure switch. Then remove the wire harness connector from the HVAC pressure switch on the A/C liquid line at the right front corner of the engine compartment. Next, pull the HVAC pressure switch from the A/C liquid line and throw the O ring seal. It is necessary, therefore, to remember that you do not need to discharge the refrigerant system for the replacement. Always follow warnings and cautions that apply to avoid serious injury.