OEM 2009 Dodge Nitro Evaporator

2009 Dodge Nitro Evaporator Parts and Q&A

• Q: How Does the Evaporator Influence Refrigerant Oil Level Adjustment in A/C Systems on 2009 Dodge Nitro?

  A: Adjusting the refrigerant oil level is vital when servicing the A/C refrigerant system so that the A/C system does not fail and the compressor is protected. If you are only replacing the A/C evaporator, use 60 milliliters (2 fluid ounces) of recommended oil in the entire refrigerant system. To know how much oil to use when replacing many A/C parts, look at the chart on Refrigerant Oil Capacities. Whenever a refrigerant line is disconnected, change the O-rings or gaskets where, to avoid possible leaks. Place the rubber seal for the evaporator tubes and tapping block in the right spot in the HVAC housing opening or remove it and put the seal back over the evaporator tubes and tapping block when changes are needed. Check that the foam insulator is well positioned around the A/C evaporator inside the HVAC housing before installing them into the lower half. Piece together the HVAC housing and secure the finished part equally to each side of the frame.