OEM 2009 Dodge Nitro A/C Accumulator

Accumulator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Accumulator found

  • 2009 Dodge Nitro A/C Accumulator Diagram - 68003970AA
    View related parts

    2009 Dodge Nitro Dehydrator Part Number: 68003970AA

    $93.15 MSRP: $141.00
    You Save: $47.85 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Drier - Receiver; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Accumulator; Drier; Drier Receiver
    • Item Weight: 1.40 Pounds
    • Item Dimensions: 16.4 x 5.2 x 5.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68003970AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Dodge Nitro Submodels:
    • Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2009 Dodge Nitro A/C Accumulator Parts and Q&A

  • Q: How to remove an A/C Accumulator on 2009 Dodge Nitro?
    A: You should start by disconnecting and isolating the negative battery cable to make room to replace the A/C accumulator. Following this, take out the refrigerant from the entire refrigeration system. Get rid of the fridge's grille and also its left air seal. Open the bottom shutter of the front fascia and take out the bolt holding the A/C accumulator to the left side A/C condenser. Take off the A/C accumulator from the A/C condenser, get rid of the O-ring seals and replace them with new ones. Now, fit plugs into the open ends of the accumulator and put tape over the condenser ports.

Related 2009 Dodge Nitro Parts