How to Install a Steering Wheel and Ensure Proper Airbag System Connection on 2009 Dodge Viper?

First, put the Clock Spring wiring leads through the hole in the steering wheel behind the horn. Line up the wide flange at the top of the steering wheel with the area missing from the steering column shaft, then push the wheel into place and make sure the steering wheel doesn't bind when it reaches the Clock Spring. Screw in the steering wheel retaining bolt with 54 Nm (40 ft. lbs.) until the steering wheel is fastened onto the shaft. Place the driver air bag near the place where the Clock Spring wiring is found and link the horn switch wiring connector. Line up the squib wires so that their connector ends match the air bag's, then press them securely in straight and listen or press for a snap. Stick the routing clips for the squib wires on the surface of the steering wheel. Set up the driver air bag correctly and put in the three mounting screws, tightening them all to 12 Nm (105 in. lbs.). Do not attach the black air bag cable to the car until you have passed the air bag System Test, since failing to do so might cause serious or fatal harm. When the test is complete, reattach the battery ground terminal and see if the steering wheel mounted accessories are working again.

OEM 2009 Dodge Viper Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Steering Wheels found

View related parts
2009 Dodge Viper Cover Part Number: TQ91DX9AA
$14.73 MSRP: $23.20
You Save: $8.47 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel - Steering Wheel; Steering Wheel Trim; Cover Steering Wheel
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.1 x 6.3 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: TQ91DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Steering Wheel, Black/Red Part Number: TQ901R1AA
$395.03 MSRP: $587.00
You Save: $191.97 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Item Weight: 4.30 Pounds
- Item Dimensions: 16.1 x 15.3 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: TQ901R1AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10 | 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Steering Wheel, Black Part Number: TQ901X9AA
$446.55 MSRP: $658.00
You Save: $211.45 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Item Weight: 4.10 Pounds
- Item Dimensions: 15.3 x 15.5 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: TQ901X9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Steering Wheel, Black/Blue Part Number: TQ902BNAA
$328.57 MSRP: $390.00
You Save: $61.43 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Item Weight: 4.20 Pounds
- Item Dimensions: 15.5 x 15.5 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: TQ902BNAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10 | 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Steering Wheel, Black/Tan Part Number: TQ901U4AA
$382.95 MSRP: $451.00
You Save: $68.05 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Item Weight: 4.10 Pounds
- Item Dimensions: 15.6 x 15.8 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: TQ901U4AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10 | 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Steering Wheel, Black/Gray Part Number: TQ901D5AA
$382.95 MSRP: $451.00
You Save: $68.05 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Item Weight: 4.20 Pounds
- Item Dimensions: 15.8 x 15.3 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: TQ901D5AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10 | 10 Cyl 8.4 L GAS
View related parts
2009 Dodge Viper Steering Wheel Part Number: 1EN791R1AA
$454.57 MSRP: $541.00
You Save: $86.43 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel - Steering; Wheel Steering
- Item Weight: 3.60 Pounds
- Item Dimensions: 11.7 x 11.2 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1EN791R1AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Viper Submodels:
- SRT-10 ACR | 10 Cyl 8.4 L GAS

2009 Dodge Viper Steering Wheel Parts and Q&A

Q: How to Install a Steering Wheel and Ensure Proper Airbag System Connection on 2009 Dodge Viper?
A: First, put the Clock Spring wiring leads through the hole in the steering wheel behind the horn. Line up the wide flange at the top of the steering wheel with the area missing from the steering column shaft, then push the wheel into place and make sure the steering wheel doesn't bind when it reaches the Clock Spring. Screw in the steering wheel retaining bolt with 54 Nm (40 ft. lbs.) until the steering wheel is fastened onto the shaft. Place the driver air bag near the place where the Clock Spring wiring is found and link the horn switch wiring connector. Line up the squib wires so that their connector ends match the air bag's, then press them securely in straight and listen or press for a snap. Stick the routing clips for the squib wires on the surface of the steering wheel. Set up the driver air bag correctly and put in the three mounting screws, tightening them all to 12 Nm (105 in. lbs.). Do not attach the black air bag cable to the car until you have passed the air bag System Test, since failing to do so might cause serious or fatal harm. When the test is complete, reattach the battery ground terminal and see if the steering wheel mounted accessories are working again.