How to Locate, Remove, and Inspect a Fuel Pump Relay on 2009 Jeep Commander?

You can see on the label at the Power Distribution Center cover that the fuel pump relay resides there. Before removing the relay, first take off the cover from the power distribution center. While dismantling the relay, check the terminals for any degradation and repair or replace as needed before installing the relay again. It is important that the pin height be the same for all terminals inside the connector for the power distribution panel, repair or replace them if necessary before attaching the relay.

OEM 2009 Jeep Commander Fuel Pump Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Relay found

View related parts
2009 Jeep Commander Fuel Pump Relay, Rear Part Number: 4727370AA
$26.96 MSRP: $39.90
You Save: $12.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727370AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Fuel Pump Relay Parts and Q&A

Q: How to Locate, Remove, and Inspect a Fuel Pump Relay on 2009 Jeep Commander?
A: You can see on the label at the Power Distribution Center cover that the fuel pump relay resides there. Before removing the relay, first take off the cover from the power distribution center. While dismantling the relay, check the terminals for any degradation and repair or replace as needed before installing the relay again. It is important that the pin height be the same for all terminals inside the connector for the power distribution panel, repair or replace them if necessary before attaching the relay.