How to Maintain and Fix a Parking Assist Distance Sensor on 2009 Jeep Commander?

The first thing to do with the Parking Assist Distance Sensor is to isolate the negative cable connected to the battery. You can change the park assist sensors and the sensor spacers by themselves, as the sensor brackets are built into the back of the rear bumper fascia. The rear bumper fascia has to be off the vehicle to access the two inboard rear park assist sensors, but the two outboard ones are accessible with the fascia installed. Remove the wire harness from the connector on the park assist sensor receptacle at the fascia's back. Work the bracket latch away from the top and bottom edges of the sensor and after disengaging the bracket, separate the spacer from the sensor membrane's projection around its edge.

OEM 2009 Jeep Commander Parking Assist Distance Sensor

Parking Assist Distance Sensor Guide

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Parking Assist Distance Sensor found

View related parts
2009 Jeep Commander Parking Sensor, Front Part Number: 1EW63TZZAA
$243.60 MSRP: $361.00
You Save: $117.40 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Parking Assist; Parking Aid Sensor, Front, Rear; Ultrasonic Sensor; Parking Sensors; Reverse Sensor; Sensor; Sensor Parking Assist Sensor Ring Use 04806229Aa; Sensor Parking Assist; Parking Aid Sensor
- Position: Front
- Replaces: 1EW63AB5AA, 1EW63FHGAA, 1EW63PR4AA, 1EW63RXFAA, 1EW631AUAA, 1EW63P76AA, 1EW631EPAA, 1EW631SCAA, 1EW63FFBAA, 1EW63FLCAA, 1EW63LAUAA, 1EW63S3XAA, 1EW631LBAA, 1EW631Z0AA, 1EW63LXTAA, 1EW631CLAA, 1EW63DX8AA, 1EW63P79AA, 1EW63LBGAA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1EW63TZZAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Parking Assist Distance Sensor Parts and Q&A

Q: How to Maintain and Fix a Parking Assist Distance Sensor on 2009 Jeep Commander?
A: The first thing to do with the Parking Assist Distance Sensor is to isolate the negative cable connected to the battery. You can change the park assist sensors and the sensor spacers by themselves, as the sensor brackets are built into the back of the rear bumper fascia. The rear bumper fascia has to be off the vehicle to access the two inboard rear park assist sensors, but the two outboard ones are accessible with the fascia installed. Remove the wire harness from the connector on the park assist sensor receptacle at the fascia's back. Work the bracket latch away from the top and bottom edges of the sensor and after disengaging the bracket, separate the spacer from the sensor membrane's projection around its edge.