OEM 2010 Chrysler PT Cruiser Air Bag Sensor

Air Bag Impact Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

  • 2010 Chrysler PT Cruiser Air Bag Sensor Diagram - 4671779AC
    View related parts

    2010 Chrysler PT Cruiser Impact Sensor, Front Part Number: 4671779AC

    $48.02 MSRP: $103.00
    You Save: $54.98 (54%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Impact; Air Bag Impact Sensor, Center, Front; Air Bag Sensor; Front Impact Sensor; Side Impact Sensor; Airbag Impact Sensor.
    • Position: Front
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 1.8 x 2.6 x 3.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4671779AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Chrysler PT Cruiser Submodels:
    • Base, Classic, Couture Edition, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
  • 2010 Chrysler PT Cruiser Air Bag Sensor Diagram - 4896059AA
    View related parts
    Product Specifications
    • Other Name: Sensor - Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor; Sensor Air Bag
    • Position: Front
    • Replaces: 4896023AA, 4686957AC
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 3.8 x 2.5 x 1.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4896059AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Chrysler PT Cruiser Submodels:
    • Base, Classic, Couture Edition, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2010 Chrysler PT Cruiser Air Bag Sensor Parts and Q&A

  • Q: How to Install Air Bag Sensors for Front and Side-Mounted Applications on 2010 Chrysler PT Cruiser?
    A: Fit the left front satellite acceleration sensor on the side radiator support and install it using two retaining screws tightened to 10.5 Nm (92 in. lbs.); after that, plug the SAS electrical connector. After that, insert the front lower grille. When fitting the right front satellite acceleration sensor, secure SAS to the side radiator support, use two retaining screws, tighten them to 10.5 Nm (92 in. lbs.), link the SAS connection and then attach the front lower grille. To use the side-mounted satellite acceleration sensor, fit SAS in the B-pillar so the connector is facing down and secure the retaining nuts up to 8 Nm (70 in. lbs.). Connect the electrical cable of the sensor and set the lower B-pillar trim in its place. It is important not to attach the battery negative cable until the system test has been executed, to avoid a serious or deadly incident.

Related 2010 Chrysler PT Cruiser Parts