How to Service and Repair a Harmonic Balancer and Crankshaft Pulley on 2010 Jeep Liberty?

Removing the negative battery cable should be done before servicing and repairing the harmonic balancer and crankshaft pulley. After that, remove the accessory drive belt, making sure you note that the transmission cooler line attaches to the shroud in the lower right corner. Afterward, take out the crankshaft harmonic balancer bolt. After that, insert Crankshaft Insert 8513A and use Three Jaw Puller 1026 to unbolt the harmonic balancer.

OEM 2010 Jeep Liberty Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Harmonic Balancer found

View related parts
2010 Jeep Liberty Vibration Damper Part Number: 53020689AB
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Item Weight: 10.90 Pounds
- Item Dimensions: 10.5 x 10.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020689AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 6 Cyl 3.7 L GAS

2010 Jeep Liberty Harmonic Balancer Parts and Q&A

Q: How to Service and Repair a Harmonic Balancer and Crankshaft Pulley on 2010 Jeep Liberty?
A: Removing the negative battery cable should be done before servicing and repairing the harmonic balancer and crankshaft pulley. After that, remove the accessory drive belt, making sure you note that the transmission cooler line attaches to the shroud in the lower right corner. Afterward, take out the crankshaft harmonic balancer bolt. After that, insert Crankshaft Insert 8513A and use Three Jaw Puller 1026 to unbolt the harmonic balancer.