How to Remove and Replace a Brake Disc on an SRT8 for Front on Chrysler 300?

It's important to first wipe off any mud or rust from the brake hub, where the rotor will attach before replacing it. After that, fit the brake rotor onto the studs and bearing on the hub. Move the caliper over the brake rotor and make sure it's aligned with the knuckle. Mount the bolts for your calipers and apply 190 Nm (140 ft. lbs.) tightening pressure. Then, fit the tire and wheel onto the car, tightening the wheel nuts to 150 Nm (or 110 ft. lbs.). After lowering the vehicle, press the brake pedal forcefully several times before you drive away. After doing the previous activities, check and adjust the brake fluid level when needed. Watch out, because initial braking is often less powerful if you've fitted new brake rotors or pads. Following the replacement, take the vehicle for a spin, stopping 1-2 times to remove and polish the brake residue.

How to Service and Repair a Rear Brake Disc on Chrysler 300?

Before servicing or repairing the rear brake rotor/disc, lift and support the car, undo the wheel nut and remove the tire and wheel. You may have to pull back the caliper piston a little to give yourself enough space to remove the caliper; be careful not to push down hard on the piston lest you harm it. Now, remove both bolts that secure the disc brake caliper adapter to the knuckle and transfer the caliper and adapter out of the wheel well, using a cord or wire to keep it out of the way so the hose is not pulled too far when it sits loosely. Tear away the brake rotor clip and slide the rotor off the hub of the wheel. Before mounting the wheels, check the brakes and the hub and then wash the surface to remove dirt and corrosion. After fitting the brake rotor on the mounting studs of the hub, put the disc brake caliper and adapter assembly over that. Screw the adapter onto the caliper at the knuckle using the 115 Nm (85 ft. lbs.) torque. Reseat the wheel and tire after tightening the mounting nuts to 150 Nm (110 ft. lbs.), following by lowering the car. Stepping on the brake pedal several times will make sure it's ready, top up the brake fluid in the reservoir as often as needed and conduct a test drive to settle any material on the brakes.

OEM Chrysler 300 Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Discs found

View related parts
Chrysler 300 Rotor, Front Part Number: 68368065AA
$118.69 MSRP: $182.00
You Save: $63.31 (35%)
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 5154118AB, 4779197AC, 4779197AF, 4779197AB, 4779197AG, 5154118AC, 4779197AD, 5154118AA, 4779197AE, 5154118AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2023 Chrysler 300 | Base, C, C Luxury, C Platinum, C SRT8, LX, Limited, S, SRT8, SRT8 Core, Signature Series, Touring, Touring L | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Rotor, Rear Part Number: 5290538AE
$153.52 MSRP: $235.00
You Save: $81.48 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake Rear; Brake Rotor
- Position: Rear
- Replaces: 5290538AB, 5290538AC, 5290538AD, 5290538AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Chrysler 300 | 3.6L V6, 5.7L V8, 6.4L V8
- 2009-2010 Chrysler 300 | 2.7L V6, 3.5L V6, 5.7L V8, 6.1L V8
- 2005-2007 Chrysler 300 | 6.1L V8
View More
View related parts
Chrysler 300 Rotor, Rear Part Number: 68368070AA
$91.83 MSRP: $142.00
You Save: $50.17 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 4779208AD, 4779208AG, 4779208AE, 4779208AH, 4779208AC, 4779208AB, 4779208AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2023 Chrysler 300 | Base, C, C Luxury, C Platinum, C SRT8, Limited, S, SRT8, SRT8 Core, Touring, Touring L | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Rotor, Front Part Number: 68368064AA
$98.15 MSRP: $151.00
You Save: $52.85 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Brake Rotor
- Position: Front
- Replaces: 4779196AE, 4779196AF, 4779196AD, 4779196AG, 4779196AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2020 Chrysler 300 | Base, C, C Luxury, C Platinum, C SRT8, LX, Limited, S, SRT8, SRT8 Core, Signature Series, Touring, Touring L | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Rotor, Rear Part Number: 68368071AA
$116.51 MSRP: $179.00
You Save: $62.49 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 4779209AB, 68368072AA, 4779209AE, 4779209AC, 4779209AD, 4779209AG, 68241042AA, 4779209AF, 68241042AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2023 Chrysler 300 | Base, C, C Luxury, C Platinum, C SRT8, LX, Limited, S, SRT8, SRT8 Core, Signature Series, Touring, Touring L | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Rotor, Front Part Number: 5290537AD
$95.80 MSRP: $141.00
You Save: $45.20 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Brake Rotor
- Position: Front
- Replaces: 5290537AA, 5290537AB, 5290537AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2023 Chrysler 300 | Base, C, C Luxury, C Platinum, C SRT8, LX, Limited, S, SRT8, SRT8 Core, Signature Series, Touring, Touring L | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Rotor, Rear Part Number: 68368073AA
$117.59 MSRP: $180.00
You Save: $62.41 (35%)
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Hardware Kit; Rotor Brake Rear; Brake Rotor
- Position: Rear
- Replaces: 4779438AF, 4779438AB, 4779438AG, 4779438AE, 4779438AA, 4779438AD, 4779438AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler 300 | C, C SRT8, LX, Limited, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Rotor, Rear Part Number: 4755539AA
$156.80 MSRP: $245.00
You Save: $88.20 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Hardware Kit; Brake Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Chrysler 300 | C, Limited, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Rotor, Front Part Number: 4755537AA
$58.30 MSRP: $143.00
You Save: $84.70 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2023 Chrysler 300 | C, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Rotor, Front Part Number: 4755538AA
$196.24 MSRP: $294.00
You Save: $97.76 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2023 Chrysler 300 | C, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS

Chrysler 300 Brake Disc

Choose OEM Brake Disc that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Brake Disc follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Brake Disc of this Chrysler 300 is the disc brake system's crucial component whose main role is to transform the car's motion energy into heat energy through abrasion. Producution of these rotors are usually done using gray iron and may incorporate fins or vanes meant for ventilation and cooling. In recent years modifications have been made such as drilled or slotted rotors that advance heat dissipation and water wipeout but these are higher in regard to wear out of pad. The Chrysler 300 has also incorporated use of two piece rotors that are composed of the central structure and friction ring which facilitates both weight and heat handling. Appropriate and timely care of the Brake Disc is really important since problems such as scarring, warping or rusting hamper the braking system. Through regular inspection and replacement of the Chrysler 300 brake system, the owners will ensure that they get the optimal from the system and also prevent the unfortunate events such as accidents due to a bad brake.

Chrysler 300 Brake Disc Parts and Q&A

Rotor, Front
68368065AA
Q: How to Remove and Replace a Brake Disc on an SRT8 for Front on Chrysler 300?
A:
It's important to first wipe off any mud or rust from the brake hub, where the rotor will attach before replacing it. After that, fit the brake rotor onto the studs and bearing on the hub. Move the caliper over the brake rotor and make sure it's aligned with the knuckle. Mount the bolts for your calipers and apply 190 Nm (140 ft. lbs.) tightening pressure. Then, fit the tire and wheel onto the car, tightening the wheel nuts to 150 Nm (or 110 ft. lbs.). After lowering the vehicle, press the brake pedal forcefully several times before you drive away. After doing the previous activities, check and adjust the brake fluid level when needed. Watch out, because initial braking is often less powerful if you've fitted new brake rotors or pads. Following the replacement, take the vehicle for a spin, stopping 1-2 times to remove and polish the brake residue.
Rotor, Rear
68368070AA
Q: How to Service and Repair a Rear Brake Disc on Chrysler 300?
A:
Before servicing or repairing the rear brake rotor/disc, lift and support the car, undo the wheel nut and remove the tire and wheel. You may have to pull back the caliper piston a little to give yourself enough space to remove the caliper; be careful not to push down hard on the piston lest you harm it. Now, remove both bolts that secure the disc brake caliper adapter to the knuckle and transfer the caliper and adapter out of the wheel well, using a cord or wire to keep it out of the way so the hose is not pulled too far when it sits loosely. Tear away the brake rotor clip and slide the rotor off the hub of the wheel. Before mounting the wheels, check the brakes and the hub and then wash the surface to remove dirt and corrosion. After fitting the brake rotor on the mounting studs of the hub, put the disc brake caliper and adapter assembly over that. Screw the adapter onto the caliper at the knuckle using the 115 Nm (85 ft. lbs.) torque. Reseat the wheel and tire after tightening the mounting nuts to 150 Nm (110 ft. lbs.), following by lowering the car. Stepping on the brake pedal several times will make sure it's ready, top up the brake fluid in the reservoir as often as needed and conduct a test drive to settle any material on the brakes.