How to Service and Repair an Evaporator Core on Chrysler 300?

You should start the evaporator core service and repair by disconnecting the HVAC house assembly. Remove the housing from the HVAC unit as needed to get to the A/C evaporator. Using care, pull the A/C evaporator and foam seal from the base part of the HVAC box. If needed, pull out the foam seal from the tapping block of the A/C evaporator and replace it if it isn't in good shape. Be sure to check and adjust the refrigerant oil while you install, as this stops the air conditioning system from breaking down and damages the compressor. When just the evaporator is being replaced, fill the refrigerant system with 60 milliliters (2 fluid ounces) of the recommended oil. Always fit new seal and gasket material along the refrigerant line whenever you disconnect it to avoid leakage. Attach the foam seal to the A/C evaporator's tapping block, but do not damage it. Put the evaporator into the bottom of the HVAC housing, check that the evaporator drain works well and install the insulator according to the instructions. Hook up all the parts of the HVAC housing and replace it into the housing assembly. After replacing the A/C evaporator, put in the proper amount of refrigerant oil, choosing just the type that matches your A/C compressor.

OEM Chrysler 300 Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Evaporators found

View related parts
Chrysler 300 Evaporator Core Part Number: 68110611AA
$271.83 MSRP: $410.00
You Save: $138.17 (34%)
ADD TO CART
Product Specifications
- Other Name: Evaporatr - A/C; A/C Evaporator Core; A/C Evaporator Core Repair Kit; Evaporator; Evaporator A/C With Tubes, Expansion Valve, And Seal; A/C Evaporator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chrysler 300 | Base, C, C Luxury, Limited, S, SRT8, SRT8 Core | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Evaporator Core Part Number: 5061585AA
$270.73 MSRP: $409.00
You Save: $138.27 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporatr - A/C; A/C Evaporator Core; A/C Evaporator Core Repair Kit; Evaporator A/C with Tubes, Expansion Valve, and Seal; A/C Evaporator.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler 300 | Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Evaporator Core Part Number: 68385097AC
$343.50 MSRP: $506.00
You Save: $162.50 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporatr - A/C; A/C Evaporator Core; A/C Evaporator Core Repair Kit; Evaporator; Evaporator A/C With Tubes, Expansion Valve, And Seal; A/C Evaporator
- Replaces: 68238026AA, 68385097AA, 68385097AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Chrysler 300 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS

Chrysler 300 Evaporator

Choose OEM Evaporator that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Evaporator follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Evaporator is part of the climate control system in Chrysler 300 automobiles optimal known for their dependability and speed. Located in the car's dashboard, owing to its principles of evaporation and condensation, the Evaporator is responsible to furnish cold air inside the cabin of the automobile. When the refrigerant flows through the evaporator coil it takes heat from the interior hand air that makes the vehicle's environment comfortable to drive and be in by reducing heat. Made of armored metal, Evaporator has a series of slender tubes and fins to improve heat exchange, subsequently increasing the efficiency of the car's air conditioner. This aspect has support of different models of Chrysler 300; stability in the performance range is achieved, from the standard model through to the 300C and the SRT-8. Therefore, the Evaporator is not limited to boosting the comfort factor; it is an important device that is responsible for the performance and durability of a car while supporting the AC system work. Thus, the Evaporator offers unique and highly effective attributes that include the ability to handle optimal thermal control for the vehicle as well as its strong construction; it also supports the Chrysler 300's high status as a full-sized luxury car that embodies style, power, and comfort. The Evaporator allows the driver to always deliver a comfortable rides anticipating the outside world weathers.

Chrysler 300 Evaporator Parts and Q&A

Evaporator Core
5061585AA
Q: How to Service and Repair an Evaporator Core on Chrysler 300?
A:
You should start the evaporator core service and repair by disconnecting the HVAC house assembly. Remove the housing from the HVAC unit as needed to get to the A/C evaporator. Using care, pull the A/C evaporator and foam seal from the base part of the HVAC box. If needed, pull out the foam seal from the tapping block of the A/C evaporator and replace it if it isn't in good shape. Be sure to check and adjust the refrigerant oil while you install, as this stops the air conditioning system from breaking down and damages the compressor. When just the evaporator is being replaced, fill the refrigerant system with 60 milliliters (2 fluid ounces) of the recommended oil. Always fit new seal and gasket material along the refrigerant line whenever you disconnect it to avoid leakage. Attach the foam seal to the A/C evaporator's tapping block, but do not damage it. Put the evaporator into the bottom of the HVAC housing, check that the evaporator drain works well and install the insulator according to the instructions. Hook up all the parts of the HVAC housing and replace it into the housing assembly. After replacing the A/C evaporator, put in the proper amount of refrigerant oil, choosing just the type that matches your A/C compressor.