How Is the Blower Motor Resistor Installed on Chrysler 300?

To place the blower motor resistor, mount it inside the HVAC housing and hold it steady with two screws, turning them to 2 Nm (17 in. lbs.). After this, plug the wire harness connector into the blower motor resistor and push the locking tab into place. Place the glove box in the instrument panel and then connect the negative battery cable.

How to Remove a Blower Motor Resistor on Chrysler 300?

Before you remove the blower motor resistor, put the vehicle in park, unhook the negative battery cable so the air bags are disabled and let the system settle for two minutes. Give the blower motor at least five minutes to cool down after turning it off, since the resistor can become very hot while it's on. Don't attempt to use the blower motor without putting the resistor back in to prevent damage to your car. Start the process by taking out the negative battery cable and letting it hang loose. After that, remove the glove box from its place in the instrument panel. Press the tab locking the wire harness connector and unplug the wire harness connector from the blower motor resistor. After that, take off the two screws locking the blower motor resistor to the casing and remove the resistor.

OEM Chrysler 300 Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Blower Motor Resistors found

View related parts
Chrysler 300 Blower Motor Resistor, Rear Part Number: 68379071AA
$124.65 MSRP: $185.00
You Save: $60.35 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control Module, Front & Rear.; Control Module; Fan Resistor; Module; Resistor; Module Power Blower Motor
- Position: Rear
- Replaces: 68079480AA, 68110616AB, 68029736AA, 68433698AA, 68110616AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Chrysler 300
- 2008-2013 Chrysler 300 | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6.1L V8, 6.4L V8
View related parts
Chrysler 300 Control Module, Front Part Number: 68224171AA
$179.01 MSRP: $270.00
You Save: $90.99 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control Module, Front; Resistor; A/C Compressor; Compressor; Module; Module Power Blower Motor
- Position: Front
- Replaces: 68224171AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chrysler 300 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Control Module, Front Part Number: 68317103AA
$119.31 MSRP: $179.00
You Save: $59.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Power; HVAC Blower Motor Control Module; Front Control Module; Blower Motor Regulator; Module; Resistor
- Position: Front
- Replaces: 5143824AA, 5061587AA, 5179985AA, 4596304AC, 4596304AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chrysler 300 | Base, C, C SRT8, LX, Limited, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Resistor Part Number: 68037310AB
$23.10 MSRP: $34.25
You Save: $11.15 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Replaces: 68037310AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler 300 | C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Resistor Part Number: 5061094AB
$18.88 MSRP: $24.30
You Save: $5.42 (23%)
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Chrysler 300 Blower Motor Resistor

Choose OEM Blower Motor Resistor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Blower Motor Resistor follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Blower Motor Resistor found in Chrysler 300 vehicles is used to control the speed of blower motor that is used in circulating either heated or cooled air inside the car. Its main function is to guarantee that the driver and all the passengers are as comfortable as possible while on the move. Chrysler 300 models may have different type or style of Blower Motor Resistor that is functioned to control air flowing properly. One of the control mechanisms work performed by the Blower Motor Resistor is done through the mapping of current flow to the blower motor to enable speed control. The different types of Blower Motor Resistor found in Chrysler 300 can be useful when the specific type has to be identified for maintenance, or replacement.

Chrysler 300 Blower Motor Resistor Parts and Q&A

Control Module, Front
68317103AA
Q: How Is the Blower Motor Resistor Installed on Chrysler 300?
A:
To place the blower motor resistor, mount it inside the HVAC housing and hold it steady with two screws, turning them to 2 Nm (17 in. lbs.). After this, plug the wire harness connector into the blower motor resistor and push the locking tab into place. Place the Glove Box in the instrument panel and then connect the negative Battery Cable.
Blower Motor Resistor, Rear
68379071AA
Q: How to Remove a Blower Motor Resistor on Chrysler 300?
A:
Before you remove the Blower Motor resistor, put the vehicle in park, unhook the negative Battery Cable so the air bags are disabled and let the system settle for two minutes. Give the blower motor at least five minutes to cool down after turning it off, since the resistor can become very hot while it's on. Don't attempt to use the blower motor without putting the resistor back in to prevent damage to your car. Start the process by taking out the negative battery cable and letting it hang loose. After that, remove the Glove Box from its place in the instrument panel. Press the tab locking the wire harness connector and unplug the wire harness connector from the blower motor resistor. After that, take off the two screws locking the blower motor resistor to the casing and remove the resistor.