How Can a TPMS Sensor Be Installed and Verified for Proper Functionality on Chrysler Crossfire?

Always replace the sealing grommet at the valve stem base, then put the pressure transmitter into the wheel, checking that the part of the wheel where the grommet seals is undamaged and clean. Place the sensor onto the wheel, fasten it with the special slotted nut and ensure the distance between the sensor and wheel is even on each side. After that, tighten the holder nut to 4 Nm (35 in. lbs.). Be careful when putting on the upper bead of the moved tire so you don't harm the wheel or tire. After mounting the upper bead, air up the tire(s) to match the recommended pressure and cap the valve stem with an original or OEM type cap. Use soap to find if there are air leaks near the valve stem and then balance the tire using the proper method for your wheels. Secure the tire or wheel to the wheel mount and reprogram the Tire Pressure Sensor/Transmitter connected to the TPM (Tire Pressure Monitoring) module. To check the TPM system, attach the DRB III(R) to the car, travel at 25 MPH for 2 minutes and watch the activity of all Tire Pressure Sensors/Transmitters with the DRB III(R) and someone else.

How to Maintain a TPMS Sensor on Chrysler Town & Country?

Before servicing the Tire Pressure Monitoring (TPM) Sensor, support and lift the vehicle and then take the tire and wheel off. Beside checking the oil level, make sure that the cap on the valve stem has an O-ring seal and only use this type for the valve stem; regular caps should not be used. Both the stem and the core of the valve are made of aluminum and nickel-plated brass and the core must be put back to guard against metal corrosion. Get the tire off the wheel correctly, paying attention never to cause any harm to the sensor while doing so. Avoid using the Bead Breaker in the sensor part of the tire when you are taking the bead off the wheel. Remember to use the tool handle 280 mm from the valve stem inside ± 10° and then take down the rim beads on the inside and outside tire wall. Then, take out the sensor nut firmly holding the sensor to the wheel, but press on the rear of the metal valve stem to keep the sensor from going backward and injuring the antenna strap. Lastly, take the sensor off of the wheel.

OEM Chrysler TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 TPMS Sensors found

View related parts
Chrysler TPMS Sensor Part Number: 68241067AB
$106.84 MSRP: $160.00
You Save: $53.16 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; TPMS Sensor Valve Assembly; Valve Repair Set; TPMS Service Kit.; Tire Pressure Sensor; Sensor; Sensor Tire Pressure Includes Cap; Sensor Tire Pressure
- Replaces: 68241067AA, 68142397AA, 68406537AA, 56029398AA, 68359037AA, 56029398AB
Fits the following Chrysler Models:
- 300 | 2020, 2010-2018 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, SRT8 Core, Touring, Touring L | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
- Town & Country | 2011-2016 | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler TPMS Sensor Part Number: 68406530AA
$69.52 MSRP: $155.00
You Save: $85.48 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Pressure Sensor; Sensor
- Replaces: 56029479AB, 56053036AA, 56029465AA, 56029479AA, 56029465AB, 56029465AC
Fits the following Chrysler Models:
- Aspen | 2007-2009 | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler TPMS Sensor Part Number: 68078861AC
$106.43 MSRP: $161.00
You Save: $54.57 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Pressure Sensor; Hardware Kit; Sensor
- Replaces: 68078861AA, 68001696AA, 56053030AB, 68001696AB, 68078861AB
Fits the following Chrysler Models:
- 200 | 2011-2014 | LX, Limited, S, Touring | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
- 300 | 2005-2007 | Base, C, C SRT8, Limited, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
- PT Cruiser | 2008-2010 | Base, Classic, Couture Edition, LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
- Pacifica | 2004-2008 | Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
- Sebring | 2007-2010 | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
- Town & Country | 2006-2007 | Base, LX, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View More
View related parts
Chrysler TPMS Sensor Part Number: 68078768AC
$48.91 MSRP: $105.00
You Save: $56.09 (54%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Pressure Sensor; Sensor
- Replaces: 68001698AB, 56053031AB, 68001698AC, 68078768AA, 56053031AC, 56029527AA, 68078768AB, 68001698AA
Fits the following Chrysler Models:
- 200 | 2012-2013 | LX, Limited, S, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
- 300 | 2008, 2005 | Base, C, C SRT8, LX, Limited, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
- Sebring | 2008 | LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
- Town & Country | 2008-2012 | LX, Limited, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View More
View related parts
Chrysler TPMS Sensor Part Number: 68313387AC
$68.02 MSRP: $102.00
You Save: $33.98 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Sensor Tire Pressure 20 Inch Wheels Only; Sensor Tire Pressure
- Replaces: 68252493AA, 68313387AA, 68313387AB, 68252493AB
Fits the following Chrysler Models:
- 200 | 2017 | 2.4L L4, 3.6L V6
- Pacifica | 2017-2022 | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2020-2022 | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View More
View related parts
Chrysler Tire Pressure Sensor Part Number: 68406527AA
$67.79 MSRP: $102.00
You Save: $34.21 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor; Tire Sensor; Pressure Sensor; Sensor
- Replaces: 52088990AD, 52088990AE, 52088990AC
Fits the following Chrysler Models:
- 300M | 2002-2004 | 3.5L V6
- Concorde | 2002-2004 | 2.7L V6, 3.5L V6
- Crossfire | 2005 | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
- Pacifica | 2004 | Base | 3.5L V6, 6 Cyl 3.5 L GAS
- Prowler | 2002 | 3.5L V6
- Town & Country | 2002-2003 | 3.3L V6, 3.8L V6
- Voyager | 2002-2003 | 2.4L L4, 3.3L V6
View More
View related parts
Chrysler TPMS Sensor Part Number: 68406529AB
$108.10 MSRP: $162.00
You Save: $53.90 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Sensor
- Replaces: 68406529AA
Fits the following Chrysler Models:
- 300 | 2019-2021, 2009-2010 | C, C SRT8, LX, Limited, S, Signature Series, Touring, Touring L | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Control Module Part Number: 68214806AF
$129.34 MSRP: $195.00
You Save: $65.66 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Tire Pressure Monitoring; Tire Pressure Monitoring System Control Module; TPMS Sensor Service Kit; Module; Module Tire Pressure Monitoring Module & Mounting Bracket; Module Tire Pressure Monitoring
- Replaces: 68214806AA, 68214806AD, 68214806AE, 68214806AB, 68214806AC
Fits the following Chrysler Models:
- 300 | 2014-2021 | C, C Platinum, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS
View related parts
Chrysler Control Module Part Number: 56029543AD
$133.80 MSRP: $202.00
You Save: $68.20 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Tire Pressure Monitoring; Tire Pressure Monitoring System Control Module; Module; Module Tire Pressure Monitoring With Bracket; Module Tire Pressure Monitoring
- Replaces: 56029543AC, 56029543AB
Fits the following Chrysler Models:
- 300 | 2011-2017 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, SRT8 Core | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler TPMS Sensor Part Number: 68399030AC
$120.42 MSRP: $182.00
You Save: $61.58 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; TPMS Sensor Service Kit.; Tire Pressure Sensor; Sensor
- Replaces: 68193586AE, 68193586AB, 68105280AF, 68193586AA, 68193586AC, 68105280AG, 68399030AB, 68399030AA, 68105280AD, 68193586AD, 68105280AC
Fits the following Chrysler Models:
- 200 | 2015-2017 | C, LX, Limited, S | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler TPMS Sensor Part Number: 68487472AB
$31.61 MSRP: $46.85
You Save: $15.24 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Pressure; Tire Pressure Monitoring System Sensor; Tire Pressure Sensor
- Replaces: 68487472AA
Fits the following Chrysler Models:
- 300 | 2022-2023 | C, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler TPMS Sensor Part Number: 68443470AB
$29.56 MSRP: $63.45
You Save: $33.89 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor
- Replaces: 68443470AA
Fits the following Chrysler Models:
- Pacifica | 2023-2025 | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring L, Limited, Pinnacle, Select, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
- Voyager | 2023-2025 | LX | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Pressure Sensor Part Number: 5096808AA
Product Specifications
- Other Name: Sensor - Tire Pressure; TPMS Sensor; Sensor Tire Pressure Valve Stem; Sensor Tire Pressure
Fits the following Chrysler Models:
- Crossfire | 2006-2008, 2004 | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

Chrysler TPMS Sensor

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler TPMS Sensor for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler TPMS Sensor Parts and Q&A

Pressure Sensor
5096808AA
Q: How Can a TPMS Sensor Be Installed and Verified for Proper Functionality on Chrysler Crossfire?
A:
Always replace the sealing grommet at the valve stem base, then put the pressure transmitter into the wheel, checking that the part of the wheel where the grommet seals is undamaged and clean. Place the sensor onto the wheel, fasten it with the special slotted nut and ensure the distance between the sensor and wheel is even on each side. After that, tighten the holder nut to 4 Nm (35 in. lbs.). Be careful when putting on the upper bead of the moved tire so you don't harm the wheel or tire. After mounting the upper bead, air up the tire(s) to match the recommended pressure and cap the valve stem with an original or OEM type cap. Use soap to find if there are air leaks near the valve stem and then balance the tire using the proper method for your wheels. Secure the tire or wheel to the wheel mount and reprogram the Tire Pressure Sensor/Transmitter connected to the TPM (Tire Pressure Monitoring) module. To check the TPM system, attach the DRB III(R) to the car, travel at 25 MPH for 2 minutes and watch the activity of all Tire Pressure Sensors/Transmitters with the DRB III(R) and someone else.
TPMS Sensor
68078768AC
Q: How to Maintain a TPMS Sensor on Chrysler Town & Country?
A:
Before servicing the Tire Pressure Monitoring (TPM) Sensor, support and lift the vehicle and then take the tire and wheel off. Beside checking the oil level, make sure that the cap on the valve stem has an O-ring seal and only use this type for the valve stem; regular caps should not be used. Both the stem and the core of the valve are made of aluminum and nickel-plated brass and the core must be put back to guard against metal corrosion. Get the tire off the wheel correctly, paying attention never to cause any harm to the sensor while doing so. Avoid using the Bead Breaker in the sensor part of the tire when you are taking the bead off the wheel. Remember to use the tool handle 280 mm from the valve stem inside ± 10° and then take down the rim beads on the inside and outside tire wall. Then, take out the sensor nut firmly holding the sensor to the wheel, but press on the rear of the metal valve stem to keep the sensor from going backward and injuring the antenna strap. Lastly, take the sensor off of the wheel.