How to Service and Repair an A/C Accumulator on Chrysler Voyager?

Start by letting out the refrigerant from the vehicle's refrigerant system and then take off the air cleaner housing located to the right of the engine compartment. Following that, drive out the screw pinning the liquid line front section fitting in place and detach the fitting from the inlet port of the A/C accumulator, throwing away the old O-ring from the liquid line fitting. Put plugs in the opened liquid line fitting and the A/C accumulator inlet, remove the screw securing the liquid line rear section fitting to the top of the A/C accumulator and disconnect the liquid line fitting from the A/C accumulator outlet port. Put a plug or tape in the open end of the liquid line fitting and the A/C accumulator outlet port, then take the nuts out of the A/C accumulator mounting bracket and take the unit off the weld studs. When inserting a new A/C accumulator, add 30 milliliters (1 fluid ounce) of proper refrigerant oil. Attach the A/C accumulator and bracket onto the right front strut tower's weld studs using the two nuts and tighten each to 10 Nm (89 in. lbs.). Take out the tape or plugs from the two ports at the rear of the liquid line, lubricate a new O-ring with refrigerant oil and put the O-ring on the rear liquid line fitting before connecting it to the A/C accumulator outlet port. Use the screw to tighten the connection between the liquid line fitting and the A/C accumulator until it reaches 2 Nm (18 in. lbs.). Proceed to the liquid line front section's fitting and the A/C accumulator's inlet port, give the new rubber O-ring seal a thin coat of ORM-OIL and tighten the screw to 2 Nm (18 in. lbs.). Install the air cleaner housing on the right side of the engine compartment and afterward evacuate and charge the refrigerant system.

OEM Chrysler Voyager A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 A/C Accumulators found

View related parts
Chrysler Voyager Dehydrator Part Number: 68286748AA
$66.45 MSRP: $99.60
You Save: $33.15 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Desiccant - A/C Filter Drier; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Drier; Filter Kit A/C Filter Drier; Filter Receiver Drier
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Dehydrator Part Number: 5066635AC
$46.40 MSRP: $107.00
You Save: $60.60 (57%)
ADD TO CART
Product Specifications
- Other Name: Line - Receiver; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Accumulator; Drier
- Replaces: 5066635AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Dehydrator Part Number: 5066503AB
$99.87 MSRP: $128.00
You Save: $28.13 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drier - Receiver; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Accumulator; Drier; Drier Receiver
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, LX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Dehydrator Part Number: 4682592
Product Specifications
- Other Name: Receiver/Drier Assembly, W/Tube, W/O - Rings; Drier; Receiver/Drier Assembly; Receiver Drier
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Dehydrator Part Number: 4682623AB
Product Specifications
- Other Name: Drier; Drier Desiccant Element; Dryer, Air Conditioning; A/C Receiver Drier; A/C Accumulator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Chrysler Voyager A/C Accumulator

Choose OEM A/C Accumulator that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each A/C Accumulator follows strict manufacturing steps to lock in quality and fit. If your Chrysler Voyager matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Voyager parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Voyager A/C Accumulator is a special unit that increases the dependability of the cars' air conditioning systems dramatically. Situated in between the evaporator and the compressor is the A/C Accumulator that is very important in removing moisture, oil, and any other debris from entering the compressor to cause severe damage or in making the A/C unit less efficient in providing cool air. This reliability is of great importance for Chrysler Voyager owners as it is connected with the longevity and efficiency of the automobile's air conditioning system functioning. Intended to fit models of the Chrysler Voyager, the A/C Accumulator is created to meet match the quality of all those models and can be regarded as one of the crucial elements for car cooling system. The A/C Accumulator has more than mere efficiency, as it provides added safety and comfort to the Chrysler Voyager by providing the passengers with a conducive and cool temperature regardless of the area's weather conditions. However, the main focus is found in the A/C Accumulator since, being a component of the automobile market that produces vehicles, it has sturdy construction coupled with proper design as significant determinants of a car's performance. Thus, Chrysler Voyager's sales volume coupled with the product quality signifies that A/C Accumulator is yet another of the fine product offering by Chrysler. In conclusion, the Chrysler Voyager A/C Accumulator is highly recommended for the proper functioning and safety of the Chrysler Voyager's air conditioning system and it is definitely something that every car owner of the mentioned vehicle should have.

Chrysler Voyager A/C Accumulator Parts and Q&A

Dehydrator
5066503AB
Q: How to Service and Repair an A/C Accumulator on Chrysler Voyager?
A:
Start by letting out the refrigerant from the vehicle's refrigerant system and then take off the air cleaner housing located to the right of the engine compartment. Following that, drive out the screw pinning the liquid line front section fitting in place and detach the fitting from the inlet port of the A/C accumulator, throwing away the old O-ring from the liquid line fitting. Put plugs in the opened liquid line fitting and the A/C accumulator inlet, remove the screw securing the liquid line rear section fitting to the top of the A/C accumulator and disconnect the liquid line fitting from the A/C accumulator outlet port. Put a plug or tape in the open end of the liquid line fitting and the A/C accumulator outlet port, then take the nuts out of the A/C accumulator mounting bracket and take the unit off the weld studs. When inserting a new A/C accumulator, add 30 milliliters (1 fluid ounce) of proper refrigerant oil. Attach the A/C accumulator and bracket onto the right front strut tower's weld studs using the two nuts and tighten each to 10 Nm (89 in. lbs.). Take out the tape or plugs from the two ports at the rear of the liquid line, lubricate a new O-ring with refrigerant oil and put the O-ring on the rear liquid line fitting before connecting it to the A/C accumulator outlet port. Use the screw to tighten the connection between the liquid line fitting and the A/C accumulator until it reaches 2 Nm (18 in. lbs.). Proceed to the liquid line front section's fitting and the A/C accumulator's inlet port, give the new rubber O-ring seal a thin coat of ORM-OIL and tighten the screw to 2 Nm (18 in. lbs.). Install the air cleaner housing on the right side of the engine compartment and afterward evacuate and charge the refrigerant system.