How to Safely Remove the Front Seat Air Bag on Dodge Caliber?

Raise the front seat forward so you can reach the air bag mount easily before removing anything. Disconnect the negative cable from the battery and then allow the system capacitor to drain for two minutes before you connect the battery again. Remove the seat that faces forward from the car. As you remove the seat back trim cover, make sure you aren't ripping the attachment area for the seat air bag, since any rip will require you to replace the complete cover. Unfasten the trim in the front and back of the front seat back, but ignore the outboard side until the seat air bag has been safely removed. Don't tug at the wire harness or push on the connector cover to remove the air bag connector from the receptacle, because this could result in damage. To remove the seat wire harness connector from the seat air bag inflator, press down the yellow tab, squeeze the two latch tabs on the connector insulator and pull the insulator completely out of the air bag inflator. Remove both of the nuts that hold the seat air bag to the side of the seat back frame. With your hand on the outboard side of the seat back trim cover, pull the track cover and cushion upward so they clear the back of the seat frame. After that, while holding between the seat back cover and frame, carefully release the air bag studs from the nylon pouch and take out the air bag, making sure nothing is damaged during this step.

How to Properly Install a Driver Air Bag on Dodge Caliber?

First, put the driver air bag into the cover so that there's no possibility of pinching the cushion toward the base of the latch hook. Following this, depress the latch mounting plate and fit the driver air bag hooks into the slots you can see on the cover. Once you've locked all the latch hooks into the plastic cover, gently draw the air bag cover away from the air bag to help the hooks settle. Be sure to install the driver air bag, but wait until the system test is completed to attach the battery negative cable. Otherwise, there may be serious or fatal consequences.

OEM Dodge Caliber Air Bag

Air Bag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Air Bags found

View related parts
Dodge Caliber Side Impact Inflator Module, Front Passenger Side Part Number: 4645992AE
$318.37 MSRP: $469.00
You Save: $150.63 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbag - Seat; Seat Air Bag, Front, Front Right; Front Seat Air Bag; Side Air Bag; Air Bag Seat
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Passenger Air Bag, Upper Passenger Side Part Number: 5108053AD
$786.62 MSRP: $1145.00
You Save: $358.38 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag - Passenger; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Passenger Air Bag Cover Serviced With Instrument Panel Cover Upper
- Position: Upper Passenger Side
- Replaces: 5108053AB, 5108053AC, 5108053AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2012 Dodge Caliber | Express, Heat, Mainstreet, Rush, SE, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Side Impact Inflator Module Part Number: 5108036AA
$182.41 MSRP: $269.00
You Save: $86.59 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Seat; Side Air Bag; Air Bag Seat
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Side Impact Inflator Module, Front Driver Side Part Number: 5108033AA
$189.21 MSRP: $279.00
You Save: $89.79 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Seat; Seat Air Bag, Front Left; Front Seat Air Bag; Side Air Bag; Air Bag Seat
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Inflator Curtain, Passenger Side Part Number: 55351256AD
$383.58 MSRP: $560.00
You Save: $176.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Side Curtain; Curtain Air Bag, Right; Head Air Bag
- Position: Passenger Side
- Replaces: 55351256AA, 55351256AC, 55351256AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Side Impact Inflator Module, Front Driver Side Part Number: 5108033AB
$384.72 MSRP: $560.00
You Save: $175.28 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Seat; Seat Air Bag, Front Left; Front Seat Air Bag; Side Air Bag; Air Bag Seat
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Side Impact Inflator Module, Front Passenger Side Part Number: 5108036AB
$398.46 MSRP: $580.00
You Save: $181.54 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Seat; Seat Air Bag, Front Right; Front Seat Air Bag; Side Air Bag; Air Bag Seat
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Side Impact Inflator Module, Front Driver Side Part Number: 4645997AD
$413.35 MSRP: $602.00
You Save: $188.65 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Seat; Seat Air Bag, Front Left; Front Seat Air Bag; Side Air Bag; Air Bag Seat
- Position: Front Driver Side
- Replaces: 68040848AA, 4645993AA, 4645997AC, 4645997AA, 4645997AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | R/T, SE, SRT-4, SXT | 1.8L L4, 2.0L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Inflator Curtain, Driver Side Part Number: 55351257AD
$533.57 MSRP: $777.00
You Save: $243.43 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Side Curtain; Curtain Air Bag, Left; Head Air Bag
- Position: Driver Side
- Replaces: 55351257AB, 55351257AA, 55351257AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Driver Inflator Module, Beige, Driver Side Part Number: XS26DK5AH
$538.15 MSRP: $784.00
You Save: $245.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Driver; Steering Wheel Air Bag; Driver Air Bag; Air Bag Driver Air Bag Delete; Air Bag Driver
- Position: Driver Side
- Replaces: XS26DK5AE, XS26DK5AD, XS26DK5AC, XS26DK5AF, XS26DK5AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | R/T, SE, SRT-4, SXT | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Passenger Air Bag, Upper Passenger Side Part Number: 4664345AG
$611.43 MSRP: $890.00
You Save: $278.57 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbag - Passenger; Instrument Panel Air Bag, Upper; Passenger Inflator Module
- Position: Upper Passenger Side
- Replaces: 4664345AC, 4664345AB, 4664345AF, 4664345AE, 4664345AD, 52029341AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Caliber | R/T, SE, SRT-4, SXT | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Passenger Air Bag, Upper Passenger Side Part Number: 5108546AC
$620.59 MSRP: $904.00
You Save: $283.41 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbag - Passenger; Instrument Panel Air Bag, Upper; Passenger Inflator Module
- Position: Upper Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2011 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, Uptown | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Passenger Air Bag, Upper Passenger Side Part Number: 5108037AC
$803.79 MSRP: $1170.00
You Save: $366.21 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbag - Passenger; Instrument Panel Air Bag, Upper; Passenger Inflator Module
- Position: Upper Passenger Side
- Replaces: 5108037AA, 5108037AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Caliber | R/T, SE, SRT-4, SXT | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Driver Inflator Module, Driver Side Part Number: XS26XDVAI
$991.57 MSRP: $1450.00
You Save: $458.43 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Driver; Steering Wheel Air Bag; Driver Air Bag; Air Bag Driver
- Position: Driver Side
- Replaces: XS26XDVAH, XS26XDVAG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Caliber Air Bag

Choose OEM Air Bag that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Air Bag follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Preserving occupant safety during collisions remains the key priority of Dodge Caliber Air Bag system because it achieves reliability and performance through its advanced design. Multiple vital components comprising an airbag cushion along with flexible fabric bag and inflation module and crash sensors function instantly upon impact to deploy the airbag system. The Dodge Caliber comes with multiple airbag options featuring driver and passenger airbags with side-curtain airbags and knee bolster airbags that provide total coverage for all models. Various airbag modules function through sophisticated crash sensors to enhance safety by specifically protecting drivers during front-impact car crashes. The Dodge Caliber Air Bag surpasses industry safety requirements such that it received honours from the Insurance Institute for Highway Safety. The Dodge Caliber Air Bag system works with all three models of the Caliber lineup SE and SXT to demonstrate its adaptable safety system design. Special airbag features consisting of both optional curtain protection and an efficient deployment system create distinctive value for Dodge Caliber Air Bag products in the automotive market. The Dodge car Air Bag establishes a defensive boundary that protects occupants from contact with surfaces which enables it to minimize accidents and improve vehicle operational efficiency. Drivers select the the automaker model Air Bag as their safety and performance choice because of its reliability reputation thus assuring drivers' road safety.

Dodge Caliber Air Bag Parts and Q&A

Side Impact Inflator Module, Front Driver Side
4645997AD
Q: How to Safely Remove the Front Seat Air Bag on Dodge Caliber?
A:
Raise the front seat forward so you can reach the air bag mount easily before removing anything. Disconnect the negative cable from the battery and then allow the system capacitor to drain for two minutes before you connect the battery again. Remove the seat that faces forward from the car. As you remove the seat back trim cover, make sure you aren't ripping the attachment area for the seat air bag, since any rip will require you to replace the complete cover. Unfasten the trim in the front and back of the front seat back, but ignore the outboard side until the seat air bag has been safely removed. Don't tug at the wire harness or push on the connector cover to remove the air bag connector from the receptacle, because this could result in damage. To remove the seat wire harness connector from the seat air bag inflator, press down the yellow tab, squeeze the two latch tabs on the connector insulator and pull the insulator completely out of the air bag inflator. Remove both of the nuts that hold the seat air bag to the side of the seat back frame. With your hand on the outboard side of the seat back trim cover, pull the track cover and cushion upward so they clear the back of the seat frame. After that, while holding between the seat back cover and frame, carefully release the air bag studs from the nylon pouch and take out the air bag, making sure nothing is damaged during this step.
Side Impact Inflator Module
5108036AA
Q: How to Properly Install a Driver Air Bag on Dodge Caliber?
A:
First, put the driver air bag into the cover so that there's no possibility of pinching the cushion toward the base of the latch hook. Following this, depress the latch mounting plate and fit the driver air bag hooks into the slots you can see on the cover. Once you've locked all the latch hooks into the plastic cover, gently draw the air bag cover away from the air bag to help the hooks settle. Be sure to install the driver air bag, but wait until the system test is completed to attach the battery negative cable. Otherwise, there may be serious or fatal consequences.