How to Service and Repair a Brake Proportioning Valve on Dodge Neon?

First, place a brake pedal holder on the brake pedal and depress it until you travel the first inch of pedal movement, then hold the pedal to isolate the master cylinder from the brakes. Following that, remove the brake tube connected to the proportioning valve you want to change and take out the proportioning valve from the master cylinder. Tighten the new O-ring on the proportioning valve after placing it in the master cylinder drain port to 17.5 Nm (155 inch lbs.). Attach the brake tube to the proportioning value and fasten its nut to a torque of 17 Nm (145 inch lbs.). When the brake pedal holder has been removed, bleed the affected brake line and test the brakes during a road test.

How to Maintain and Fix a Brake Proportioning Valve on Dodge Neon?

First, attach a brake pedal holder to the pedal and depress it several inches so that as you service your combination valve, the master cylinder remains pressurized. After that, remove the proportioning valve from the master cylinder and unscrew the brake tube where the valve was located. When you put in the O-ring on the prototype, make sure to place it on the proportioning valve and then insert it into the master cylinder port, wiping it to a torque value of 17.5 Nm (155 inch lbs.). Screw the brake tube onto the proportioning valve, with a torque of 17 Nm (145 inch lbs.). Remove the brake pedal holder and then bleed the damaged brake hose, checking the vehicle's brakes by driving it on the road.

OEM Dodge Neon Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Proportioning Valves found

View related parts
Dodge Neon Pressure Metering Valve Part Number: 5015181AA
Product Specifications
- Other Name: Valve - Proportioning; Reservoir Valve; Valve Proportioning
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Neon | ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Pressure Metering Valve Part Number: 4762166
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve, Proportioning - H.C.U. (Primary); Isolator, Tube Assembly Dash; Valve Proportioning
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Neon | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Neon Pressure Metering Valve Part Number: 5278073AB
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve Proportioning
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Neon | ACR, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Neon Pressure Metering Valve Part Number: 5015182AA
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Valve Proportioning
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Dodge Neon | R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Pressure Metering Valve Part Number: 4797186
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Isolator, Tube Assembly Dash; Valve Proportioning
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1999 Dodge Neon | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Neon Pressure Metering Valve Part Number: 4797185
Product Specifications
- Other Name: Valve - Proportioning; Brake Proportioning Valve; Isolator, Tube Assembly Dash; Valve Proportioning
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1999 Dodge Neon | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS

Dodge Neon Brake Proportioning Valve

Choose OEM Brake Proportioning Valve that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Proportioning Valve follows strict manufacturing steps to lock in quality and fit. If your Dodge Neon matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Neon parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Brake Proportioning Valve present in Dodge Neon vehicles is quite important in maintaining brake fluid pressure in the braking system especially when the car is fitted with front disk and rear drum brakes. in its simplest form, Its primary role is to avoid the rear brakes locking before the front brakes during hard and sudden stopping to improve on safety and control. This is done through modulation of the brake fluid pressure to the rear brakes in relation with the pressures of the fluid, as well as the cross sectional area of the output lines. Dodge Neon models use this Brake Proportioning Valve for better control of car's brake system particularly in case of emergency. The valve controls the forces, which are applied to the rear brakes thereby preventing them from locking at a wrong time, thus ensuring stability. Although there is information about certain specificities of certain styles or types of Brake Proportioning Valves for Dodge Neon vehicles, it is essential to know that the mechanism of operation is relatively general and common throughout models, centering on the regulation of braking forces for safety enhancement.

Dodge Neon Brake Proportioning Valve Parts and Q&A

Pressure Metering Valve
5015182AA
Q: How to Service and Repair a Brake Proportioning Valve on Dodge Neon?
A:
First, place a brake pedal holder on the brake pedal and depress it until you travel the first inch of pedal movement, then hold the pedal to isolate the master cylinder from the brakes. Following that, remove the brake tube connected to the proportioning valve you want to change and take out the proportioning valve from the master cylinder. Tighten the new O-ring on the proportioning valve after placing it in the master cylinder drain port to 17.5 Nm (155 inch lbs.). Attach the brake tube to the proportioning value and fasten its nut to a torque of 17 Nm (145 inch lbs.). When the brake pedal holder has been removed, bleed the affected Brake Line and test the brakes during a road test.
Pressure Metering Valve
5015181AA
Q: How to Maintain and Fix a Brake Proportioning Valve on Dodge Neon?
A:
First, attach a brake pedal holder to the pedal and depress it several inches so that as you service your combination valve, the master cylinder remains pressurized. After that, remove the proportioning valve from the master cylinder and unscrew the brake tube where the valve was located. When you put in the O-ring on the prototype, make sure to place it on the proportioning valve and then insert it into the master cylinder port, wiping it to a torque value of 17.5 Nm (155 inch lbs.). Screw the brake tube onto the proportioning valve, with a torque of 17 Nm (145 inch lbs.). Remove the brake pedal holder and then bleed the damaged brake hose, checking the vehicle's brakes by driving it on the road.