How to Maintain an Air Bag Sensor in a Standard Cab on Dodge Ram 1500?

To work on the side impact sensor in a standard cab, first cut off the battery power by disconnecting the negative cable to keep the air bags from triggering and then delay for two minutes for the system capacitor's energy to be absorbed. Pull the front seat as far forward as you can to help you get at the trim around the B-pillar. Slide the front outboard seat belt and retractor off the inside of the B-pillar and then unscrew the nut that attaches the side impact sensor (1) stud to the inner B-pillar. Reach the side impact sensor through the hole at point (3) inside the B-pillar and disconnect the anti-rotation pin and mounting stud from the inner B-pillar holes. Pull the sensor out of the B-pillar far enough so that the body wire harness (2) will disconnect from its connector on the sensor. If the impact sensor gets dropped while servicing a vehicle, it must be discarded and replaced.

How to Service an Air Bag Sensor for Front Impact on Dodge Ram 1500?

Disable the Supplemental Restraint System (SRS) and unplug or isolate the negative battery cable for two minutes to allow the system's capacitor to discharge before servicing the front impact sensor. Front impact sensors should not be struck or dropped because doing so can harm them or interfere with their calibration; once a front impact sensor is dropped, a new one should be installed. Take out the screw that holds the impact sensor to the back of the lower radiator crossmember on the left or right side. Remove the headlamp lower dash and dash connector from the sensor connector and then pull out the front impact sensor from inside the engine compartment.

OEM Dodge Ram 1500 Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Bag Sensors found

View related parts
Dodge Ram 1500 Impact Sensor, Outer Part Number: 68056160AA
$158.62 MSRP: $234.00
You Save: $75.38 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer, Rear; Air Bag Sensor; Side Impact Sensor; Sensor for Side Airbag Impact and B/C Pillar.
- Position: Outer
- Replaces: 4896153AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Air Bag Sensor, Front Part Number: 4896061AB
$75.57 MSRP: $112.00
You Save: $36.43 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Impact C Pillar; Sensor Impact
- Position: Front
- Replaces: 4672311AA, 52851601AB, 4896061AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Air Bag Sensor, Rear Part Number: 68056162AA
$89.62 MSRP: $132.00
You Save: $42.38 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front, Side, B Pillar, and C Pillar Sensors.
- Position: Rear
- Replaces: 4896152AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Impact Sensor Part Number: 56006911
Product Specifications
- Other Name: Sensor Air Bag; Air Bag Sensor; Front Sensor; Sensor, Air Bag Crash
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 1500 | Base, LT, Laramie, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Side Impact Sensor Part Number: 56043167AB
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor; Air Bag Sensor; Diagnostic Module; Side Sensor
- Replaces: 56043167AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8.3L V10

Dodge Ram 1500 Air Bag Sensor

Choose OEM Air Bag Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Air Bag Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The component that can be classified under safety and reliability is the Dodge Ram 1500 Air Bag Sensor commonly referred to as a crash sensor. Serving as a compact yet important apparatus, this one identifies the effects and sends a message to the control unit to initiate the release of the air bags for the passengers safety in case of collisions. Regarding the Dodge Ram 1500 model, several versions of the Air Bag Sensor have been developed specifically to increase the sensitivity of the air bag system in the new versions of the vehicle. A celebrated brand, the Dodge Ram 1500 is a full-size pick-up truck which has continued to incorporate such precautious part as the Air Bag Sensor to enhance the efficiency and safety of the vehicle. Spanning across a number of Ram 1500 trim levels, standing in the center of the Dodge brand, means that they can use the latest advanced safety tech, thus stressing the carmaker's focus on innovation. Notsurprisingly, the Air Bag Sensor in the Dodge Ram 1500 is optimal designed to integrate the company'saccomplishments of general safety steps within the vehicle, thereby guaranteeing the occupant safety in a general manner. Late enactment and improved sensitivity are two additional factors that distinguish the Dodge Ram 1500 Air Bag Sensor in the automotive market, which makes it an important component of the truck's safety system. In conclusion, the Dodge Ram 1500 Air Bag Sensor clearly demonstrates this company's commitment to providing users with remarkable performance and absolute safety, thus, strengthening the position of the Ram 1500 in the full-size pickup market.

Dodge Ram 1500 Air Bag Sensor Parts and Q&A

Air Bag Sensor, Front
4896061AB
Q: How to Maintain an Air Bag Sensor in a Standard Cab on Dodge Ram 1500?
A:
To work on the side impact sensor in a standard cab, first cut off the battery power by disconnecting the negative cable to keep the air bags from triggering and then delay for two minutes for the system capacitor's energy to be absorbed. Pull the front seat as far forward as you can to help you get at the trim around the B-pillar. Slide the front outboard Seat Belt and retractor off the inside of the B-pillar and then unscrew the nut that attaches the side impact sensor (1) stud to the inner B-pillar. Reach the side impact sensor through the hole at point (3) inside the B-pillar and disconnect the anti-rotation pin and mounting stud from the inner B-pillar holes. Pull the sensor out of the B-pillar far enough so that the body wire harness (2) will disconnect from its connector on the sensor. If the impact sensor gets dropped while servicing a vehicle, it must be discarded and replaced.
Side Impact Sensor
56043167AB
Q: How to Service an Air Bag Sensor for Front Impact on Dodge Ram 1500?
A:
Disable the Supplemental Restraint System (SRS) and unplug or isolate the negative Battery Cable for two minutes to allow the system's capacitor to discharge before servicing the front impact sensor. Front impact sensors should not be struck or dropped because doing so can harm them or interfere with their calibration; once a front impact sensor is dropped, a new one should be installed. Take out the screw that holds the impact sensor to the back of the lower radiator crossmember on the left or right side. Remove the headlamp lower dash and dash connector from the sensor connector and then pull out the front impact sensor from inside the engine compartment.