How to Service a Cruise Control Switch on Dodge Ram 2500?

Before servicing the cruise control switch, remove and isolate the negative battery cable(s) to shut off the air bag system and then wait for two minutes to allow the air bag capacitor to discharge. After that, take out the air bag module following the guidance for the restraint systems. Unscrew the mounting screws at the switch, remove the switch and then disconnect the electrical connector there. Start by making the connection between the electrical connector and the switch and then install the switch and screw it onto the wall at 3 Nm (26 in. lbs. ± 2 in. lbs.) tightness. Follow the restraint systems guide to install the air bag module and then reconnect all negative battery cables after restarting the vehicle.

How to Maintain and Fix a Cruise Control Switch on Dodge Ram 2500?

The type of cruise control switch should be identified by checking the engine control computer, if it's the JTEC with a 3-plug connector or the NGC found in the 5.7L V-8 with a 4-plug connector, because they each work and look differently. NGC panels always come with pigtail leads on the switch, whereas JTEC panels do not. First, take off the switch mounting screw. After that, release the switch located under the steering wheel and detach its electrical connection or separate the switch wire harness from the steering wheel wires before removing the switch. When mounting, attach the connector to the switch or connect the pigtail wire harness to the wire harness under the steering wheel, careful not to squash the wires. Re-place the switch onto the side of the steering wheel, then tighten the switch holding screw to the recommended torque level.

OEM Dodge Ram 2500 Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Cruise Control Switches found

View related parts
Dodge Ram 2500 Cruise Switch, Passenger Side Part Number: 56049378AD
$88.66 MSRP: $134.00
You Save: $45.34 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Right; Engagement Switch; Switch Speed Control
- Position: Passenger Side
- Replaces: 56049378AB, 56049378AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Cruise Switch, Driver Side Part Number: 56049379AC
$96.34 MSRP: $148.00
You Save: $51.66 (35%)
ADD TO CART
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Left; Engagement Switch; Switch Speed Control
- Position: Driver Side
- Replaces: 56049379AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Cruise Switch Part Number: 4671929AC
$64.06 MSRP: $95.75
You Save: $31.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch; Engagement Switch; Switch; Switch Speed Control
- Replaces: 4671929AB, 4671929AA, 4671929AE, 68057091AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 2500 | Laramie, Power Wagon, SLT, ST, SXT, TRX | 5.7L V8, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Cruise Switch, Passenger Side Part Number: 5026006AB
$94.78 MSRP: $144.00
You Save: $49.22 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Right; Engagement Switch; Set/Resume Switch; Switch
- Position: Passenger Side
- Replaces: 5026006AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Ram 2500 | Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 5.9L L6, 6 Cyl 5.9 L DIESEL, 8.0L V10
View related parts
Dodge Ram 2500 Cruise Switch, Driver Side Part Number: 56021333
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Left; Engagement Switch; Switch; Switch Speed Control
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Cruise Switch, Driver Side Part Number: 56021333AB
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Left; Engagement Switch; Switch; Switch Speed Control
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Cruise Switch, Passenger Side Part Number: 56021332AB
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Right; Engagement Switch; Switch; Switch Speed Control
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 On/Off Switch, Driver Side Part Number: 5026007AA
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Left; Cruise Switch; Engagement Switch; Switch; Switch Speed Control
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Ram 2500 | Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL
View related parts
Dodge Ram 2500 Cruise Switch Part Number: 56007514AA
Product Specifications
- Other Name: Switch - Speed Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 2500 Cruise Switch, Driver Side Part Number: 56045779AA
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Left; Engagement Switch; Switch Speed Control
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Ram 2500 | Laramie, SLT, ST | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Cruise Switch, Passenger Side Part Number: 56045776AA
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Right; Engagement Switch; Switch Speed Control
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Dodge Ram 2500 | Laramie, SLT, ST | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 2500 Cruise Switch, Passenger Side Part Number: 56021332
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Right; Engagement Switch; Switch; Switch Speed Control
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Ram 2500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

Dodge Ram 2500 Cruise Control Switch

Choose OEM Cruise Control Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Cruise Control Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 2500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 2500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Ram 2500 Cruise Control Switch serves as a fundamental part that enables motorists to keep their speed stable while eliminating the requirement of regular activation of the accelerator pedal. The cruise control switch enables activation and speed management along with simultaneous adjustment of acceleration and deceleration and speed resumption which results in improved road safety and efficiency. This reliable Dodge Ram 2500 Cruise Control Switch has found application throughout multiple Ram 2500 models due to its perfect integration with the vehicle systems. Since its initial development the speed management control device has undergone modifications that added new functionality to its original basic design. The Dodge Ram 2500 model profits significantly from its Cruise Control Switch because this feature enhances driver comfort during prolonged driving sessions. The special features of the Dodge Ram 2500 Cruise Control Switch including intuitive operation and fast system feedback establish the automobile as an outstanding preferred purchase for people searching for a dependable pickup truck. The Dodge car Cruise Control Switch stands as an essential design element which produces superior performance and safety benefits for the model model.

Dodge Ram 2500 Cruise Control Switch Parts and Q&A

Cruise Switch, Passenger Side
56021332AB
Q: How to Service a Cruise Control Switch on Dodge Ram 2500?
A:
Before servicing the cruise control switch, remove and isolate the negative Battery Cable(s) to shut off the Air Bag system and then wait for two minutes to allow the air bag capacitor to discharge. After that, take out the air bag module following the guidance for the restraint systems. Unscrew the mounting screws at the switch, remove the switch and then disconnect the electrical connector there. Start by making the connection between the electrical connector and the switch and then install the switch and screw it onto the wall at 3 Nm (26 in. lbs. ± 2 in. lbs.) tightness. Follow the restraint systems guide to install the air bag module and then reconnect all negative battery cables after restarting the vehicle.
Cruise Switch, Driver Side
56049379AC
Q: How to Maintain and Fix a Cruise Control Switch on Dodge Ram 2500?
A:
The type of cruise control switch should be identified by checking the engine control computer, if it's the JTEC with a 3-plug connector or the NGC found in the 5.7L V-8 with a 4-plug connector, because they each work and look differently. NGC panels always come with pigtail leads on the switch, whereas JTEC panels do not. First, take off the switch mounting screw. After that, release the switch located under the steering wheel and detach its electrical connection or separate the switch wire harness from the steering wheel wires before removing the switch. When mounting, attach the connector to the switch or connect the pigtail wire harness to the wire harness under the steering wheel, careful not to squash the wires. Re-place the switch onto the side of the steering wheel, then tighten the switch holding screw to the recommended torque level.