JeepParts
My Garage
My Account
Cart
OEM Dodge Stratus Rocker Arm
Engine Rocker Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Rocker Arms found
Dodge Stratus Rocker Arms Part Number: MD167981
$14.57 MSRP: $26.80You Save: $12.23 (46%)Ships in 1-2 Business Days
Dodge Stratus Rocker Arms Part Number: MD178782
$21.00 MSRP: $42.45You Save: $21.45 (51%)Ships in 1-2 Business Days
Dodge Stratus Exhaust Rocker Arms Part Number: 4648702AC
$58.98 MSRP: $91.55You Save: $32.57 (36%)Ships in 1-2 Business Days
Dodge Stratus Rocker Arms Part Number: MD167980
$15.94 MSRP: $32.20You Save: $16.26 (51%)Ships in 1-2 Business Days
Dodge Stratus Rocker Arms Part Number: 4884042AA
Dodge Stratus Intake Rocker Arm Part Number: 4648701AB
Dodge Stratus Rocker Arms Part Number: 4792295AB
Dodge Stratus Rocker Arm
Choose OEM Rocker Arm that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Rocker Arm follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
Lifting the hood of a Dodge Stratus of the year 1995-2005, you will come across the Dodge Stratus Rocker Arm among the many components that ensure the car's reliability and performance. This basic component helps in the transmission of the motion from the pushrod to the intake and exhaust valves, thus allowing for proper use of the valves which in turn gives better output from the engine. Made from such materials as stamped steel or aluminium, the Shock Body, or Rocker Arm features in the Dodge Stratus that can take on the high-performance dynamic of the vehicle especially in models built with enhanced fulcrum bearings for use at very high RPM ratios. The rocker ratio, which varies between 1.5:1 and 1.8:1, increases lift of the camshaft; therefore, the Dodge Stratus's performance and fuel consumption improve overall. It's flexibility is boosted by compatibility with both the sedan and coupe versions of the Stratus making the Dodge Stratus Rocker Arm ideal for preserving the integrity of the engine. Duties in increasing safety measures cannot be overemphasized since a healthy Rocker Arm is key to reduced and less straining engine operation thus elongated durability of other elements. Of significance, the Dodge Stratus Rocker Arm fits well in the market through cutting out the unnecessary friction and wear much to the benefit of roller rocker kinds of designs which employ needle bearings. Such characteristics make it possible for Dodge Stratus to be trusted as an efficient car which will be interesting to the drivers who cannot pay much attention to this matter but at the same time, they want to drive fast and safe.
Dodge Stratus Rocker Arm Parts and Q&A
- Q: How to Maintain a Rocker Arm Assembly with Camshafts Installed on Dodge Stratus?A:If you want to service the rocker arm assembly inside the car while the Camshafts are installed, start by removing the negative cable of the battery and removing the cover over the cylinder head and the spark plugs. Turn the engine so the lobe of the camshaft being removed sits on the follower's base and check that the Piston is below TDC but at least 6.3 mm. When assembling cam followers again, remember to mark their original spots. Lever down the valve assembly using Special Tools 8215-A and 8436 to take off each rocker arm, one by one. Ensure the rocker arms are not damaged or excessively worn and change them when this is the situation. While installing, use clean oil on each rocker arm, then gently pull on the valve assembly with Special Tools 8215-A and 8436, fixing it to the rocker arm and valve stem until all arms are used. In the last stage, put the spark plugs back, the cylinder head cover and link the negative cable again to the battery.
- Q: How to Service and Repair a Rocker Arm Assembly on Dodge Stratus?A:Start the service and repair of the rocker arm assembly by getting rid of the cylinder head cover(s). Your engine should not be turned without the Crankshaft present to aid in rotation and avoid valve or lifter damage. Turn the engine so the base circle of the cam lobe is showing under the rocker arm to be removed and depress the spring songs just enough to detach the rocker with Special Tools 8215-A and 8216-A Adapter. Take the rocker arm out from the cylinder head and remember the order it was in, as you will need them again if they can be recycled. Check for damage on each rocker arm and repeat for all those you remove. Coat the rocker arms with engine oil for installation and spin the camshaft until the lobe is at the heel on the arm being inserted. Turn to Special Tools 8215-A and 8216-A Adapter again and press them on the valve spring just as far as needed to put the rocker arm into its original location (for reused parts) over the valve and Lash Adjuster and release the tension on the valve spring. Make sure each rocker arm is correctly under the lash adjuster and valve tip and do this for all rocker arms before finishing with the replacement of the cylinder head cover(s).
Related Dodge Stratus Parts
Dodge Stratus Oil Filter
Dodge Stratus Oil Pan
Dodge Stratus Cam Gear
Dodge Stratus Camshaft
Dodge Stratus Cylinder Head
Dodge Stratus Dipstick
Dodge Stratus Lash Adjuster
Dodge Stratus Piston
Dodge Stratus Rocker Arm Pivot
Dodge Stratus Timing Chain Guide
Dodge Stratus Timing Cover Gasket
Dodge Stratus Valve Cover Gasket