How to Remove the Ignition Coil from a 3.7L Engine on Jeep Commander?

Begin by determining which ignition coil needs to be accessed, because you might have to take off the intake tube or box to get better access. Place pressure on the top unlocking switch with your finger and then pull the electrical connector out from the coil. Be sure to blow compressed air at the area at the base of the coil before continuing. After that, gently remove the coil mounting nut from the mounting stud. Pull the coil up slowly from the cylinder head opening while using a little twisting motion. Take the coil out of the vehicle at last. This coil is for two cylinders, secured to the top of the intake manifold by a stud or nut, with a rubber boot connecting the spark plug to the coil which also has a spring inside for contact. The rubber boot and spring cannot be serviced apart from the rest of the coil assembly.

How to install an Ignition Coil in a 3.7L Engine on Jeep Commander?

It helps to blow compressed air around the top of the spark plug before you install the ignition coil. Examine the rubber boot's condition (4) and grease the spark plug end of the boot and the top of the spark plug with Mopar(R) Dielectric Grease # J8126688 before installation. Move the coil (1) on top of the cylinder head, inserting it into the opening and align the base of the coil over the mounting stud as you push the spark plug onto the coil. Fit and tighten the coil mounting stud nut (2) to 8 Nm (70 in.lbs). After that, attach the electrical cable to the coil by simply snapping it into place and if need be, set back the throttle body air intake tube or intake air box.

OEM Jeep Commander Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ignition Coils found

View related parts
Jeep Commander Ignition Coil Part Number: 56028138AF
$83.96 MSRP: $126.00
You Save: $42.04 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Ignition Coil Set; Coil Ignition
- Replaces: 56028138AD, 56028138AB, 56028138AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Ignition Coil Part Number: 5149049AB
$86.41 MSRP: $130.00
You Save: $43.59 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Jeep Commander | Limited, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Ignition Coil Part Number: 68320417AA
$83.51 MSRP: $125.00
You Save: $41.49 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil
- Replaces: 5149199AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Commander Ignition Coil Part Number: 68238603AA
$104.52 MSRP: $144.00
You Save: $39.48 (28%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Replaces: 56029129AA, 56029129AF, 56029129AB, 68060346AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | Limited, Overland, Sport | 5.7L V8, 8 Cyl 5.7 L GAS

Jeep Commander Ignition Coil

Choose OEM Ignition Coil that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Ignition Coil follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Ignition Coil is in great demand due to the efficiency and reliability, so it stands for essential part of the ignition system of Commander automobiles. This component effectively recharges the high voltage of the vehicle's 12-volt battery which ranges from 15,000 to 40,000 volts and used to ignite the air/fuel mixture in cylinders. The Jeep Commander models consist of the Jeep Commander XK and the Jeep Commander 2022 and they incorporate engine ignition coil designs for example COIL-ON-PLUG or COP that improve spark delivery and do not require high tension leads. But also has added advantages in the areas of safety of the Jeep Commander and cutting out the chances of emissions of the engine and variation in fuel usage. For this reason, the Ignition Coil can be used with many engine options such as V6, and V8 making sure that the driver enjoys a great performance regardless of the Jeep model. Also, the Ignition Coil has certain superiority in the automotive market because of this physical construction and excellent performance in the worst climates, and so preferred by Jeep lovers. Thus, being a part of the Jeep Commander's fuel ignition delivery system, this ignition coil improves the efficiency and safety of the vehicle and becomes indispensable for all those who value reliability and exciting performance in their automobiles.

Jeep Commander Ignition Coil Parts and Q&A

Ignition Coil
68238603AA
Q: How to Remove the Ignition Coil from a 3.7L Engine on Jeep Commander?
A:
Begin by determining which ignition coil needs to be accessed, because you might have to take off the intake tube or box to get better access. Place pressure on the top unlocking switch with your finger and then pull the electrical connector out from the coil. Be sure to blow compressed air at the area at the base of the coil before continuing. After that, gently remove the coil mounting nut from the mounting stud. Pull the coil up slowly from the cylinder head opening while using a little twisting motion. Take the coil out of the vehicle at last. This coil is for two cylinders, secured to the top of the Intake Manifold by a stud or nut, with a rubber boot connecting the spark plug to the coil which also has a spring inside for contact. The rubber boot and spring cannot be serviced apart from the rest of the coil assembly.
Ignition Coil
5149049AB
Q: How to install an Ignition Coil in a 3.7L Engine on Jeep Commander?
A:
It helps to blow compressed air around the top of the spark plug before you install the ignition coil. Examine the rubber boot's condition (4) and grease the spark plug end of the boot and the top of the spark plug with Mopar(R) Dielectric Grease # J8126688 before installation. Move the coil (1) on top of the cylinder head, inserting it into the opening and align the base of the coil over the mounting stud as you push the spark plug onto the coil. Fit and tighten the coil mounting stud nut (2) to 8 Nm (70 in.lbs). After that, attach the electrical cable to the coil by simply snapping it into place and if need be, set back the throttle body air intake tube or intake air box.