How to Install a Cigarette Lighter Power Outlet on Jeep Commander?

Place the heated seat switch assembly in the rear section of the floor console and push it firmly so all the retaining tabs are properly in place. Should you use one, join the wires from the 2nd row heated seat switches, 115 Volt outlet and auxiliary audio jacks to the trim under the floor console in the rear. Put the trim panel on the console and fit the bottom tabs into the slots, then press its upper part forward and hold it there to pop the clips into their places. Lastly, link the battery to the negative cable and make sure that the second row seats are heating up again.

How to Service the Cigarette Lighter Power Outlet on Jeep Commander?

Before serving the 115 V outlet, first take off and isolate the negative lead from the battery cable. Later, take a trim stick (special tool C-4755) or an alternative tool and carefully squeeze the upper edge of the floor console console rear trim panel so that the clips holding it are released all around the panel. Lift the panel back and up to take the bottom tabs out of the floor console. If suitable, remove the back heater switches, the 115 Volt outlet and the auxiliary audio jacks from the trim panel on the back of the floor console. Remember to use either the trim stick (special tool # C-4755) or an equivalent one to carefully remove the AC power outlet from the trim panel.

OEM Jeep Commander Cigarette Lighter

Car Cigarette Lighter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Cigarette Lighters found

View related parts
Jeep Commander Power Outlet, Center Part Number: 4793554AC
$24.35 MSRP: $36.05
You Save: $11.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lighter; 12 Volt Accessory Power Outlets: Rear Right, Rear Left, Center, Front, Rear; Housing; Cigarette Lighter Socket.; Power Outlet Mount; Armrest Outlet; Power Outlet Cigar; Power Outlet Power
- Position: Center
- Replaces: 4793554AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Power Outlet, Front Part Number: 4685590
$26.67 MSRP: $39.45
You Save: $12.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Outlet; 12 Volt Accessory Power Outlet Housing, Front; Center; Cigarette Lighter Socket.; Lighter Socket; Power Outlet Base; Cigar Lighter Base; Serviced Without Cap.
- Position: Front
- Replaces: 4685590AB, 5026362AA, 6AL38DX9AA, 6AL38LXHAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Cigarette Lighter

Choose OEM Cigarette Lighter that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Cigarette Lighter follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Cigarette Lighter is one of the important parts for improving the usability and productivity of Jeep Commander automobile brands for their quality and durability. While on a basic level the Cigarette Lighter is meant to just ignite cigarettes, today it is an automatic V-Coil Lighter that is a source of power for multiple electronics parts. This shift is in line with the consumer's new way of life where they are shifting from smoking to more of a technologically inclined one. The Jeep Commander is offered with a range of models such as the XK type, and the 2022 Meridian type among others; the above models include a 12V part socket that looks like the conventional cigarette lighters, but they are standard part sockets for supply of electrical energy in all Jeep Commander units. Apart from offering a vibrant look to the interior space of a vehicle, this functionality is essential in safety since it offers a steady power supply to gizmos like GPS devices and charger for mobile gadgets. Available in the automotive market, Cigarette Lighter has a long lasting design and is very easy to use and hence essential for every jeep afficionado. The Jeep Commander has been known to be a strong vehicle and so is this Cigarette Lighter demonstrating that Jeep is a reliable vehicle for work hours and off-roading. Altogether, Cigarette Lighter is evidence that the brand with great success continues its evolution and developmental improvement of automobiles.

Jeep Commander Cigarette Lighter Parts and Q&A

Power Outlet, Center
4793554AC
Q: How to Install a Cigarette Lighter Power Outlet on Jeep Commander?
A:
Place the heated seat switch assembly in the rear section of the floor console and push it firmly so all the retaining tabs are properly in place. Should you use one, join the wires from the 2nd row heated seat switches, 115 Volt outlet and auxiliary audio jacks to the trim under the floor console in the rear. Put the trim panel on the console and fit the bottom tabs into the slots, then press its upper part forward and hold it there to pop the clips into their places. Lastly, link the battery to the negative cable and make sure that the second row seats are heating up again.
Power Outlet, Front
4685590
Q: How to Service the Cigarette Lighter Power Outlet on Jeep Commander?
A:
Before serving the 115 V outlet, first take off and isolate the negative lead from the Battery Cable. Later, take a trim stick (special tool C-4755) or an alternative tool and carefully squeeze the upper edge of the floor console console rear trim panel so that the clips holding it are released all around the panel. Lift the panel back and up to take the bottom tabs out of the floor console. If suitable, remove the back heater switches, the 115 Volt outlet and the auxiliary audio jacks from the trim panel on the back of the floor console. Remember to use either the trim stick (special tool # C-4755) or an equivalent one to carefully remove the AC power outlet from the trim panel.