How to Maintain a Turn Signal Flasher on Jeep Wrangler?

Start your repair by disconnecting and isolating the battery negative cable and keeping everything calm in the car for two minutes while the air bag system's capacitor discharges. Start by taking off the steering column opening cover from the instrument panel and the two screws on the bottom of the steering column shroud. If your steering column tilts, set it at its lowest point and leave the tilt release lever unlocked. Now, pull the upper shroud off the steering column, grab the combination flasher and detach the terminals in the back of the left multi-function switch housing by pulling the flasher toward the dash panel. Put the combination flasher in the back part of the left multi-function switch and then join the terminals with the cavity openings. When the flasher fits, push down until it seats securely. Once done, fit the upper shroud over the column, matching the locating tabs with the twin multi-function switch control stalk watershields and secure the lower shroud with two screws tightened to 2 Nm (18 in. lbs.). When required, lift the tilt steering column to the highest position and fasten it, add the steering column opening cover and then reattach the negative cable on the battery.

How to Service a Turn Signal Flasher on Jeep Grand Cherokee?

First, separate the negative terminal of the battery to stop the air bag system when air bag cars are being worked on and wait for two minutes for the capacitor to discharge. First, take off the cover at the steering column opening in the instrument panel and then remove the combination flasher from the Junction Block (JB). When installing, put the combination flasher in its correct position in the JB, where its terminals match up with the terminal cavities. Forcefully connect the combination flasher by seating the terminals in the JB receptacle. After that, reattach the opening cover for the steering column and reconnect the negative battery cable.

OEM Jeep Turn Signal Flasher

Turn Signal Indicator Flasher

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Turn Signal Flashers found

View related parts
Jeep Turn Signal Flasher Part Number: 68499026AA
$64.92 MSRP: $91.65
You Save: $26.73 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flasher; Hazard Flasher
- Replaces: 56021551
Fits the following Jeep Models:
- Cherokee | 1997-2001 | Classic, Country, Limited, SE, Sport | 2.5L L4, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
- Wrangler | 1997-2000 | SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Turn Signal & Hazard Flasher Part Number: 68499064AA
$93.60 MSRP: $140.00
You Save: $46.40 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flasher
- Replaces: 4607084
Fits the following Jeep Models:
- Wrangler | 2004-2006, 2001-2002 | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View related parts
Jeep Turn Signal Flasher Part Number: 68499068AA
$43.49 MSRP: $63.60
You Save: $20.11 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flasher; Hazard Flasher
- Replaces: 4686094
Fits the following Jeep Models:
- Grand Cherokee | 1999-2004 | Laredo, Limited, Overland, Special Edition, Sport | 4.0L L6, 4.7L V8, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS, EKY
View related parts
Jeep Turn Signal Flasher Part Number: 2932877
Product Specifications
- Other Name: Flasher; Hazard Flasher; Turn Signal & Emergency Warning (2 Lamp); Hazard Warning & Trailer Tow.
- Replaces: 56021321
Fits the following Jeep Models:
- CJ7 | 1984-1986 | Base, Laredo, Renegade | 4 Cyl 2.5 L GAS, 6 Cyl 4.2 L GAS
- Cherokee | 1984-1996 | Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Comanche | 1986-1992 | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Grand Cherokee | 1993-1995 | Base, Laredo, Limited, Orvis, SE | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS
- Grand Wagoneer | 1993 | Base | 8 Cyl 5.2 L GAS
- J10 | 1984-1986 | Base | 6 Cyl 4.2 L GAS, 8 Cyl 5.9 L GAS
- J20 | 1984-1986 | Base | 8 Cyl 5.9 L GAS
- Scrambler | 1984-1986 | Base, Laredo, Renegade, SR | 4 Cyl 2.5 L GAS, 6 Cyl 4.2 L GAS
- Wrangler | 1987-1995 | Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
View More
View related parts
Jeep Turn Signal Flasher Part Number: 56000903
Product Specifications
- Other Name: Flasher; Flasher, Turn Signal, Standard 2 Lamp; Flasher, Turn Signal
Fits the following Jeep Models:
- Cherokee | 1984-1995 | Base, Briarwood, Chief, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS
- Comanche | 1986-1992 | Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.0 L GAS

Jeep Turn Signal Flasher

OEM parts sourced directly from Jeep deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Jeep Turn Signal Flasher for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Turn Signal Flasher makes signals clean and timed and protects all lanes of changes and hazard warnings. In 1945, Jeep began its civil life and introduced rough rigs that shook off and forgave broken paths. Out of that original open-air outpost, Jeep developed a reputation for go anywhere confidence and friendship on dusty convoys. Selec-Terrain demonstrates that the brand does not miss a step in the future and gives drivers an opportunity to adjust the grip to snow, sand, or mud by simply twisting a knob. Dashboards in a Jeep now display sharp graphics and respond to voice commands and download updates over-the-air as the tires shred rock. Jeep circles are also characterized by a spirit of community, with owners sharing trail tips and hailing the practical add-ons that make errands an adventure. The Turn Signal Flasher is connected to the signaling circuit and supplies a continuous cadence that is followed by incandescent or LED bulbs without flicker. Since the Turn Signal Flasher is powered by the low current of LEDs, drivers can change the lamps at their own will and maintain their visibility. A rough housing allows the Turn Signal Flasher to shake off vibration, heat, and wet so the signal remains active way off the pavement. The Turn Signal Flasher is a five minute install with quick slot-in connectors that get drivers back on the road with each blink.

Jeep Turn Signal Flasher Parts and Q&A

Turn Signal & Hazard Flasher
68499064AA
Q: How to Maintain a Turn Signal Flasher on Jeep Wrangler?
A:
Start your repair by disconnecting and isolating the battery negative cable and keeping everything calm in the car for two minutes while the air bag system's capacitor discharges. Start by taking off the steering column opening cover from the instrument panel and the two screws on the bottom of the steering column shroud. If your steering column tilts, set it at its lowest point and leave the tilt release lever unlocked. Now, pull the upper shroud off the steering column, grab the combination flasher and detach the terminals in the back of the left multi-function switch housing by pulling the flasher toward the dash panel. Put the combination flasher in the back part of the left multi-function switch and then join the terminals with the cavity openings. When the flasher fits, push down until it seats securely. Once done, fit the upper shroud over the column, matching the locating tabs with the twin multi-function switch control stalk watershields and secure the lower shroud with two screws tightened to 2 Nm (18 in. lbs.). When required, lift the tilt steering column to the highest position and fasten it, add the steering column opening cover and then reattach the negative cable on the battery.
Turn Signal Flasher
68499068AA
Q: How to Service a Turn Signal Flasher on Jeep Grand Cherokee?
A:
First, separate the negative terminal of the battery to stop the air bag system when air bag cars are being worked on and wait for two minutes for the capacitor to discharge. First, take off the cover at the steering column opening in the instrument panel and then remove the combination flasher from the Junction Block (JB). When installing, put the combination flasher in its correct position in the JB, where its terminals match up with the terminal cavities. Forcefully connect the combination flasher by seating the terminals in the JB receptacle. After that, reattach the opening cover for the steering column and reconnect the negative battery cable.