To install the front wheel stud, place the vehicle on supports, remove the wheel and tire and finally put the new stud in place. Following this, get rid of the brake caliper, caliper adapter and rotor. Unscrew the stud out of the hub by utilizing Remover C-4150-A. Start by fitting the new stud into the hub flange; put three washers on the stud and then the lug nut, flat edge up against the washers. Screw the nut clockwise until the stud firmly connects with the flange of the hub. After that, undo the lug nut and washers, next replace the brake rotor, caliper adapter and caliper in that order. After that, mount the wheel and tire onto the vehicle, using a new lug nut for removed studs and lift the vehicle by removing the support.