How to Service a Brake Master Cylinder on 2000 Dodge Dakota?

Before servicing the brake master cylinder, remove the brake lines and the nuts on which it is mounted. Always bleed the brake master cylinder after you have disassembled it. After that, bolt the new brake master cylinder onto the booster's mounting studs, tighten all the mounting nuts till they read 18 Nm and link the brake lines once more, tightening them to 19 Nm. Make sure to fill and bleed the inner brake system.

OEM 2000 Dodge Dakota Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2000 Dodge Dakota Reservoir Part Number: 4882865
Product Specifications
- Other Name: Master Cylinder - Brake Master Cylinder; Brake Master Cylinder Reservoir; Reservoir Brake Master Cylinder
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4882865
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Dakota Submodels:
- Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Dakota Master Cylinder Part Number: 5093049AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.70 Pounds
- Item Dimensions: 10.9 x 7.9 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093049AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Dakota Brake Master Cylinder Parts and Q&A

Q: How to Service a Brake Master Cylinder on 2000 Dodge Dakota?
A: Before servicing the brake master cylinder, remove the brake lines and the nuts on which it is mounted. Always bleed the brake master cylinder after you have disassembled it. After that, bolt the new brake master cylinder onto the booster's mounting studs, tighten all the mounting nuts till they read 18 Nm and link the brake lines once more, tightening them to 19 Nm. Make sure to fill and bleed the inner brake system.