How to Remove and Install an Engine-Mounted Epoxy-Filled Ignition Coil on 2000 Dodge Dakota?

At the rear of the distributor, an epoxy filled ignition coil is mounted onto a bracket on the side of the engine. First remove both the ignition coil secondary cable and the engine harness connector from the ignition coil. After that, remove the bolts or nuts holding the ignition coil in place on the bracket and take out the coil. To install, fix the ignition coil to the bracket and use just a wrench to tighten nuts and bolts to 11 Nm (100 in. lbs.); if only bolts are present, tighten them to 5 Nm (50 in. lbs.). After that, hook up the engine harness connector and the ignition coil cable to the ignition coil.

OEM 2000 Dodge Dakota Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2000 Dodge Dakota Ignition Coil Part Number: 56028172AC
$74.65 MSRP: $115.00
You Save: $40.35 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil
- Replaces: 56028172AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 2.9 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028172AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, R/T, SLT, SXT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Dakota Ignition Coil Part Number: 56028138AF
$83.96 MSRP: $126.00
You Save: $42.04 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Ignition Coil Set; Coil Ignition
- Replaces: 56028138AD, 56028138AB, 56028138AE
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.6 x 3.3 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028138AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Dakota Submodels:
- Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 4 Cyl 2.5 L GAS, 4.7L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Dakota Ignition Coil Parts and Q&A

Q: How to Remove and Install an Engine-Mounted Epoxy-Filled Ignition Coil on 2000 Dodge Dakota?
A: At the rear of the distributor, an epoxy filled ignition coil is mounted onto a bracket on the side of the engine. First remove both the ignition coil secondary cable and the engine harness connector from the ignition coil. After that, remove the bolts or nuts holding the ignition coil in place on the bracket and take out the coil. To install, fix the ignition coil to the bracket and use just a wrench to tighten nuts and bolts to 11 Nm (100 in. lbs.); if only bolts are present, tighten them to 5 Nm (50 in. lbs.). After that, hook up the engine harness connector and the ignition coil cable to the ignition coil.