OEM 2000 Dodge Durango Blower Control Switches

HVAC Control Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Control Switches found

  • 2000 Dodge Durango Blower Control Switches - ST86TL2AA
    2000 Dodge Durango Blower Control Switches Diagram - ST86TL2AA
    View related parts
    Product Specifications
    • Other Name: Switch Rear Blower; HVAC Blower Control Switch; Blower Motor Switch; Switch Rear Blower Rear Headliner; Blower Control Switch
    • Position: Rear
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: ST86TL2AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2000 Dodge Durango Submodels:
    • Base, R/T, SLT, SLT Plus, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
  • 2000 Dodge Durango Blower Control Switches - 68171482AA
    2000 Dodge Durango Blower Control Switches Diagram - 68171482AA
    View related parts
    Product Specifications
    • Other Name: Control - A/C And Heater; Climate Control Module
    • Replaces: 5015738AA, 5015738AB
    • Item Weight: 1.40 Pounds
    • Item Dimensions: 12.9 x 5.7 x 4.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68171482AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Durango Submodels:
    • Base, R/T, SLT, SLT Plus, Sport | 3.9L V6, 4.7L V8, 5.2L V8, 5.9L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango Blower Control Switches Parts and Q&A

  • Q: How to Remove and Install Blower Control Switches with Optional Rear Overhead Air Conditioning Units on 2000 Dodge Durango?
    A: To remove the rear blower motor switch (for models with optional rear overhead AC), disconnect the battery negative cable. Use a trim stick to pry the switch from the headliner, unplug the wire harness, then reinstall by plugging it back in and pressing the switch into place before reconnecting the battery.

Related 2000 Dodge Durango Parts