JeepParts
My Garage
My Account
Cart
OEM 2001 Dodge Durango Blower Control Switches
HVAC Control Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Blower Control Switches found
2001 Dodge Durango Heater Control, Rear Part Number: 55056249AE
Product Specifications- Other Name: Control - A/C And Heater - Auxiliary; HVAC Temperature Control Panel; Climate Control Module; Blower Switch; Dash Control Unit
- Position: Rear
- Replaces: 55055904AE, 55055904AC, 55055904AB, 55056249AD, 55055904AD, 55056249AC, 55055904AA, 55056249AA, 55056249AB
- Item Weight: 1.90 Pounds
- Item Dimensions: 12.9 x 5.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55056249AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Durango Heater Control, Front Part Number: 55056250AE
Product Specifications- Other Name: Control - A/C And Heater With Zone; HVAC Temperature Control Panel, Front; Climate Control Module; Blower Control Switch; Dash Control Unit
- Position: Front
- Replaces: 55056250AA, 55055907AA, 55055907AB, 55056250AC, 55056250AB, 55055907AE, 55055907AC, 55056250AD, 55055907AD
- Item Weight: 1.90 Pounds
- Item Dimensions: 12.9 x 5.8 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55056250AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2001 Dodge Durango Blower Control Switches Parts and Q&A
- Q: How to Remove and Install Blower Control Switches on 2001 Dodge Durango?A: Removing and installing the rear blower motor switch found in the right bucket region must be done according to specific procedures proper to models with optional rear heater-A/C systems. To remove the old battery, separate and isolate the negative cable before anything else. After that, take your trim stick or wide flat-bladed tool and gently lift over the two indentations at the outside of the rear control to separate it from the headliner. Pull the rear blower motor switch from and away from the headliner and once it's accessible, unplug the wire harness connector from its back, then remove the switch as well. First, hook the wire harness onto the back of the rear blower motor switch, then pull the wire harness back through the opening in the headliner. Pushing down softly on the rear blower motor switch, slide the switch into the mounting hole until it snaps into place and then plug the negative battery cable back in.
Related 2001 Dodge Durango Parts
2001 Dodge Durango Blower Motor
2001 Dodge Durango Blend Door Actuator
2001 Dodge Durango Heater Core
2001 Dodge Durango Evaporator
2001 Dodge Durango A/C Accumulator
2001 Dodge Durango A/C Clutch
2001 Dodge Durango A/C Compressor Cut-Out Switches
2001 Dodge Durango A/C Condenser
2001 Dodge Durango A/C Hose
2001 Dodge Durango A/C Switch
2001 Dodge Durango A/C System Valve Core
2001 Dodge Durango HVAC Pressure Switch