How to Service and Repair a Brake Disc on 2000 Jeep Wrangler?

The first step in repairing or servicing the brake disc is to remove the wheel and tire and afterward the caliper. After that, take off the retainers holding the disc in place on the hub studs and unfasten the disc from the hub. If you have to service the disc shield, take out the front hub and bearing assembly first. When using a new disc, take off any covering from the disc surfaces with carburetor cleaner before joining it to the hub. After doing that, fit the caliper again and then connect the wheel and tire assembly.

OEM 2000 Jeep Wrangler Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Disc found

View related parts
2000 Jeep Wrangler Rotor, Front Part Number: 5016434AA
$157.22 MSRP: $238.00
You Save: $80.78 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Front
- Item Weight: 17.00 Pounds
- Item Dimensions: 11.1 x 11.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5016434AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2000 Jeep Wrangler Brake Disc Parts and Q&A

Q: How to Service and Repair a Brake Disc on 2000 Jeep Wrangler?
A: The first step in repairing or servicing the brake disc is to remove the wheel and tire and afterward the caliper. After that, take off the retainers holding the disc in place on the hub studs and unfasten the disc from the hub. If you have to service the disc shield, take out the front hub and bearing assembly first. When using a new disc, take off any covering from the disc surfaces with carburetor cleaner before joining it to the hub. After doing that, fit the caliper again and then connect the wheel and tire assembly.