OEM 2001 Dodge Neon A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Compressor Cut-Out Switches found

  • 2001 Dodge Neon A/C Compressor Cut-Out Switches - 5014574AA
    2001 Dodge Neon A/C Compressor Cut-Out Switches Diagram - 5014574AA
    View related parts

    2001 Dodge Neon Pressure Switch Part Number: 5014574AA

    $66.93 MSRP: $94.50
    You Save: $27.57 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Safety & Compressor Cut-Out Switch; A/C Trinary Switch.; High Pressure Cut-Off Switch; Switch A/C High Pressure Cut Off
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 1.3 x 1.3 x 1.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5014574AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Dodge Neon Submodels:
    • ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2001 Dodge Neon A/C Compressor Cut-Out Switches Parts and Q&A

  • Q: How Do A/C Compressor Cut-Out Switches Affect High Pressure Sensor Service and Repair on 2001 Dodge Neon?
    A: Before servicing the high pressure sensor/switch, the refrigerant must be removed from the system. Drain out the refrigerant and then remove the wiring connector at the switch. Get rid of the snap ring on the inside and pull the switch out from within the compressor. After cleaning the switch mounting bore, install the high pressure cutout switch including a new O-ring into your compressor. Reattach the small internal snap ring and then link the wire harness to the switch. Afterward, suck out the remaining refrigerant and fill it all back inside the system.

Related 2001 Dodge Neon Parts