How to Properly Service and Repair a Brake Line Using ISO Flaring on 2001 Jeep Grand Cherokee?

Division Provincial recommends using a preformed metal brake tube for brake hose and line service and repair, while steel tubes could be used in emergencies when factory replacements are not available. You should use special tools to help prevent the metal brake tubes from being bent or twisted, while double inverted flares and ISO flares are made by using special flaring tools. The Snap-On Flaring Tool TFM-428 or an alternative should be used to build an ISO flare. Start by cutting the damaged part of the tube with a Tubing Cutter, afterwards clean any burrs inside the tube. After that, attach the tube nut to the tube, guide the tube into the flaring tool and press the tool bar down, placing the tube on top of the tool bar before tightening the tool bar. Receive the proper sized adaptor for the flaring and screw it onto the yoke screw after applying grease to the adaptor. After that, set the adaptor and yoke screw on the last tube and tighten the yoke screw until the adaptor rests squarely against the tool bar.

OEM 2001 Jeep Grand Cherokee Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Lines found

View related parts
2001 Jeep Grand Cherokee Flex Hose Part Number: 52128096AB
Product Specifications
- Other Name: Hose - Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose Brake
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128096AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Jeep Grand Cherokee Flex Hose, Rear Driver Side Part Number: 52128095
Product Specifications
- Other Name: Line - Brake; ABS Pressure Hose, Rear Left; Hydraulic Hose; Brake Hose; Brake Line; Hose Brake
- Position: Rear Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.7 x 1.6 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128095
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Jeep Grand Cherokee Flex Hose, Rear Passenger Side Part Number: 52128094
Product Specifications
- Other Name: Line - Brake; ABS Pressure Hose, Rear Right; Hydraulic Hose; Brake Hose; Brake Line; Hose Brake
- Position: Rear Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.5 x 2.1 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128094
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Jeep Grand Cherokee Flex Hose, Front Driver Side Part Number: 52128093AB
Product Specifications
- Other Name: Hose Brake; ABS Pressure Hose, Front Left; Hydraulic Hose; Brake Hose; Brake Line; Front Speed Sensor
- Position: Front Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128093AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2001 Jeep Grand Cherokee Flex Hose, Front Passenger Side Part Number: 52128092AB
Product Specifications
- Other Name: Hose - Brake; ABS Pressure Hose, Front Right; Hydraulic Hose; Brake Hose; Brake Line; Front Speed Sensor; Hose Brake
- Position: Front Passenger Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128092AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2001 Jeep Grand Cherokee Brake Line Parts and Q&A

Q: How to Properly Service and Repair a Brake Line Using ISO Flaring on 2001 Jeep Grand Cherokee?
A: Division Provincial recommends using a preformed metal brake tube for brake hose and line service and repair, while steel tubes could be used in emergencies when factory replacements are not available. You should use special tools to help prevent the metal brake tubes from being bent or twisted, while double inverted flares and ISO flares are made by using special flaring tools. The Snap-On Flaring Tool TFM-428 or an alternative should be used to build an ISO flare. Start by cutting the damaged part of the tube with a Tubing Cutter, afterwards clean any burrs inside the tube. After that, attach the tube nut to the tube, guide the tube into the flaring tool and press the tool bar down, placing the tube on top of the tool bar before tightening the tool bar. Receive the proper sized adaptor for the flaring and screw it onto the yoke screw after applying grease to the adaptor. After that, set the adaptor and yoke screw on the last tube and tighten the yoke screw until the adaptor rests squarely against the tool bar.