How to Remove and Install a MAP Sensor on the Throttle Body on 2002 Jeep Wrangler?

To remove the MAP sensor, detach the air cleaner intake tube and unscrew the two mounting bolts. Slide off the rubber fitting, and then remove it from the sensor. For installation, reattach the fitting, position the sensor and secure the sensor with bolts with a torque of 3 Nm, reinstall the intake tube.

OEM 2002 Jeep Wrangler MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2002 Jeep Wrangler M.A.P. Sensor Part Number: 56029405
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map See Note; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029405
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Wrangler Submodels:
- Rubicon, SE, Sahara, Sport, Unlimited, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2002 Jeep Wrangler MAP Sensor Parts and Q&A

Q: How to Remove and Install a MAP Sensor on the Throttle Body on 2002 Jeep Wrangler?
A: To remove the MAP sensor, detach the air cleaner intake tube and unscrew the two mounting bolts. Slide off the rubber fitting, and then remove it from the sensor. For installation, reattach the fitting, position the sensor and secure the sensor with bolts with a torque of 3 Nm, reinstall the intake tube.