How to Maintain a Blower Motor Resistor on 2003 Dodge Durango?

Remember to separate the battery negative wire before touching the blower motor resistor. Under the passenger seat, unscrew both hex screws on the blower motor resistor, unplug the front blower motor resistor and carefully pop it out from the HVAC unit. Connect the front blower motor resistor to the wire harness connector, then install it into the HVAC unit in the right orientation. After that, install the two screws on the HVAC to a torque of 2 2 Nm (20 in. lbs) and, lastly, attach the battery negative cable.

OEM 2003 Dodge Durango Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

View related parts
2003 Dodge Durango Blower Motor Resistor, Rear Part Number: 5019639AA
$46.35 MSRP: $99.55
You Save: $53.20 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Rear; Resistor; Resistor Blower Motor
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.5 x 6.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019639AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Module Part Number: 4885797AE
$245.89 MSRP: $282.00
You Save: $36.11 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Blend Air; HVAC Blend Door Actuator
- Replaces: 4885797AD, 5019699AB
- Item Weight: 2.90 Pounds
- Item Dimensions: 19.4 x 12.2 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4885797AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 4.7L V8, 5.9L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Durango Blower Motor Resistor Parts and Q&A

Q: How to Maintain a Blower Motor Resistor on 2003 Dodge Durango?
A: Remember to separate the battery negative wire before touching the blower motor resistor. Under the passenger seat, unscrew both hex screws on the blower motor resistor, unplug the front blower motor resistor and carefully pop it out from the HVAC unit. Connect the front blower motor resistor to the wire harness connector, then install it into the HVAC unit in the right orientation. After that, install the two screws on the HVAC to a torque of 2 2 Nm (20 in. lbs) and, lastly, attach the battery negative cable.