How to Maintain a Blower Motor on 2003 Dodge Durango?

Before you service the front blower motor, take out the lower right kick panel and lift back the carpeting under the trim panel and front cowl. Take the blower motor's electrical cable out and loosen the three screws attached to the blower motor and wheel to the heater-A/C housing. Remove the blower motor and wheels from inside the passenger compartment side of the heater-A/C housing. During installation, place the blower motor and its wheel assembly inside the heater-A/C housing so that the parts are in proper spots. Put in the three screws and turn them with a wrench to reach a torque of 2.2 Nm (20 in. lbs.). Rewiring the blower motor and adding the right kick panel come after the passenger side carpet is carefully got back into place.

OEM 2003 Dodge Durango Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motors found

View related parts
2003 Dodge Durango Blower Motor, Rear Part Number: 5019640AB
$118.88 MSRP: $197.00
You Save: $78.12 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor, Rear; Motor Blower With Wheel
- Position: Rear
- Replaces: 5019640AA
- Item Weight: 3.70 Pounds
- Item Dimensions: 10.0 x 9.9 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019640AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Adventurer, Base, Limited, R/T, SLT, SLT Plus, ST, SXT, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Blower Motor, Front Part Number: 4885669AC
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor, Front; Blower Assembly; Motor Blower With Wheel; HVAC Blower Motor
- Position: Front
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 11.2 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4885669AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Durango Blower Motor Parts and Q&A

Q: How to Maintain a Blower Motor on 2003 Dodge Durango?
A: Before you service the front blower motor, take out the lower right kick panel and lift back the carpeting under the trim panel and front cowl. Take the blower motor's electrical cable out and loosen the three screws attached to the blower motor and wheel to the heater-A/C housing. Remove the blower motor and wheels from inside the passenger compartment side of the heater-A/C housing. During installation, place the blower motor and its wheel assembly inside the heater-A/C housing so that the parts are in proper spots. Put in the three screws and turn them with a wrench to reach a torque of 2.2 Nm (20 in. lbs.). Rewiring the blower motor and adding the right kick panel come after the passenger side carpet is carefully got back into place.