How to Service an Air Bag Control Module on 2004 Chrysler Crossfire?

To service the Air Bag Control Module, disable the system by taking the battery negative cable off and waiting two minutes. Remove the center console, disconnect the occupant restraint controller and remove it. Reinstall the controller, making sure the orientation is correct, and connect the electrical connector. Performing verification and programming before reconnecting the battery.

OEM 2004 Chrysler Crossfire Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Control Modules found

View related parts
2004 Chrysler Crossfire Control Module Part Number: 5099301AB
Product Specifications
- Other Name: Sensor - Air Bag Control; Air Bag Control Module; Diagnostic Module
- Replaces: 5099301AA
- Item Weight: 1.00 Pounds
- Item Dimensions: 6.4 x 4.8 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099301AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
2004 Chrysler Crossfire Passenger Discriminating Sensor Part Number: 5102756AA
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Seat Sensor Mat; Occupant Module; Module Air Bag Control
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.7 x 2.8 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102756AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2004 Chrysler Crossfire Air Bag Control Module Parts and Q&A

Q: How to Service an Air Bag Control Module on 2004 Chrysler Crossfire?
A: To service the Air Bag Control Module, disable the system by taking the battery negative cable off and waiting two minutes. Remove the center console, disconnect the occupant restraint controller and remove it. Reinstall the controller, making sure the orientation is correct, and connect the electrical connector. Performing verification and programming before reconnecting the battery.