Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2004 Dodge Dakota Brake Master Cylinder

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

  • 2004 Dodge Dakota Brake Master Cylinder - 5093049AA
    2004 Dodge Dakota Brake Master Cylinder Diagram - 5093049AA
    View related parts

    2004 Dodge Dakota Master Cylinder Part Number: 5093049AA

    Product Specifications
    • Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
    • Item Weight: 2.70 Pounds
    • Item Dimensions: 10.9 x 7.9 x 5.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5093049AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2004 Dodge Dakota Submodels:
    • Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2004 Dodge Dakota Brake Master Cylinder Parts and Q&A

  • Q: How to Service and Repair a Brake Master Cylinder on 2004 Dodge Dakota?
    A: First, cut off the brake lines from the brake master cylinder, disconnect the low fluid switch and then remove the things holding the cylinder in place to get it free. It is important to bleed the brake master cylinder before you put it in place during car repair. Then, connect the new brake master cylinder to the mounting studs for the booster, secure it with nuts you've tightened to 18 Nm (160 inch lbs.) and link the brake lines, adjusting their tightness to 19 Nm (170 inch lbs.). Connect the low fluid level switch again and next, fill and purge the base brake system.

Related 2004 Dodge Dakota Parts

Alternate Year Models

+
2003 Dodge Dakota Brake Master Cylinder 2005 Dodge Dakota Brake Master Cylinder