How to Service and Install a Driveshaft Center Support Bearing on 2004 Dodge Dakota?

Removal of propeller shaft and slip joint boot clamped to root out the rear propeller shaft in order to service the driveshaft center support bearing. Hammer and punch the slinger off, and press the bearing off. Fit new bearing and slinger, grease the splines and re-assemble half-shafts and propeller shaft.

OEM 2004 Dodge Dakota Driveshaft Center Support Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Driveshaft Center Support Bearing found

View related parts
2004 Dodge Dakota Center Bearing Part Number: 5080662AA
Product Specifications
- Other Name: Bearing - Drive Shaft; Drive Shaft Center Support Bearing; Driveshaft Center Support Bearing; Center Support Bearing; Center Bearing Drive Shaft
- Item Weight: 2.90 Pounds
- Item Dimensions: 7.9 x 8.0 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5080662AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Dakota Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2004 Dodge Dakota Driveshaft Center Support Bearing Parts and Q&A

Q: How to Service and Install a Driveshaft Center Support Bearing on 2004 Dodge Dakota?
A: Removal of propeller shaft and slip joint boot clamped to root out the rear propeller shaft in order to service the driveshaft center support bearing. Hammer and punch the slinger off, and press the bearing off. Fit new bearing and slinger, grease the splines and re-assemble half-shafts and propeller shaft.