How to Maintain the Exhaust Pipe in Your System on 2005 Chrysler PT Cruiser?

Before working on the middle section of the exhaust system, raise the car on a hoist and apply penetrating oil to the fastener of the pipe part you need to remove, except for parts touching the muffler or exhaust isolators, where soap and water is what you should use. Delete the muffler, then take off the clamp around the band and the support isolator to separate the intermediate pipe from the catalytic converter pipe. Good mating of the parts requires you to clean and polish the ends of the pipes and muffler, throw out any damaged or worn isolators, clamps, supports and attachments and replace them with new, healthy ones similar to the originals. Don't use the clamps until after checking that everything is in place and no clearance issues exist; then, install the supports for the intermediate pipe and isolator, then the muffler underneath. Position each belt correctly and clear of underbody components and then tighten the band clamps to 47 Nm (35 ft. lbs.). Band clamps must not be tightened so much that the two sides hit the hourglass-shaped block in the center, because it will stretch the clamp and make it less effective, requiring you to replace it. Pull off the nut on the band clamp and bend the ends of the clamp at the weld until the spot breaks apart. Then use a new clamp at the same angle as you did before.

OEM 2005 Chrysler PT Cruiser Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Exhaust Pipes found

View related parts
2005 Chrysler PT Cruiser Exhaust Pipe Part Number: 5278194AC
$192.03 MSRP: $291.00
You Save: $98.97 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Extension; Direct-Fit Exhaust; Exhaust System Kit; Intermed Pipe; Pipe Exhaust Extension
- Item Weight: 9.70 Pounds
- Item Dimensions: 93.5 x 21.1 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278194AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler PT Cruiser Catalytic Converter Part Number: 5085905AC
$3227.38 MSRP: $4695.00
You Save: $1467.62 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Converter; Converter Catalytic
- Item Weight: 15.30 Pounds
- Item Dimensions: 38.2 x 6.7 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085905AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler PT Cruiser Exhaust Pipe Part Number: 5085910AC
Product Specifications
- Other Name: Pipe - Exhaust Extension; Exhaust Intermediate Pipe; Direct-Fit Exhaust; Exhaust System Kit; Intermed Pipe; Pipe Exhaust Extension
- Replaces: 5085910AB
- Item Weight: 12.70 Pounds
- Item Dimensions: 56.2 x 17.3 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085910AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler PT Cruiser Muffler Part Number: 5085267AF
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Resonator
- Replaces: 5085267AC, 5085267AE, 5085267AD
- Item Weight: 24.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085267AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler PT Cruiser Muffler Part Number: 5290586AD
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Resonator
- Replaces: 5278853AF, 5290586AB, 5278853AG, 5290586AC, 5278853AH
- Item Weight: 20.00 Pounds
- Item Dimensions: 38.1 x 21.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290586AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler PT Cruiser Muffler Part Number: 5278503AH
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Resonator; Muffler Exhaust
- Replaces: 5278503AF, 5278503AC, 5278503AD, 5278503AG, 5278503AE
- Item Weight: 18.20 Pounds
- Item Dimensions: 37.7 x 18.6 x 9.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278503AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler PT Cruiser Muffler Part Number: 5278195AG
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Resonator; Muffler And Tailpipe Exhaust; Muffler Exhaust
- Replaces: 5278195AD, 5278195AC, 5278195AF, 5278195AE
- Item Weight: 17.80 Pounds
- Item Dimensions: 38.9 x 20.4 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278195AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler PT Cruiser Catalytic Converter Part Number: 5278850AG
Product Specifications
- Other Name: Converter - Catalytic; Converter; Converter Catalytic
- Item Weight: 14.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278850AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler PT Cruiser Catalytic Converter Part Number: 5085980AD
Product Specifications
- Other Name: Converter - Exhaust; Converter; Pipe And Converter Exhaust; Converter Catalytic
- Item Weight: 15.50 Pounds
- Item Dimensions: 48.5 x 6.6 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085980AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2005 Chrysler PT Cruiser Exhaust Pipe Parts and Q&A

Q: How to Maintain the Exhaust Pipe in Your System on 2005 Chrysler PT Cruiser?
A: Before working on the middle section of the exhaust system, raise the car on a hoist and apply penetrating oil to the fastener of the pipe part you need to remove, except for parts touching the muffler or exhaust isolators, where soap and water is what you should use. Delete the muffler, then take off the clamp around the band and the support isolator to separate the intermediate pipe from the catalytic converter pipe. Good mating of the parts requires you to clean and polish the ends of the pipes and muffler, throw out any damaged or worn isolators, clamps, supports and attachments and replace them with new, healthy ones similar to the originals. Don't use the clamps until after checking that everything is in place and no clearance issues exist; then, install the supports for the intermediate pipe and isolator, then the muffler underneath. Position each belt correctly and clear of underbody components and then tighten the band clamps to 47 Nm (35 ft. lbs.). Band clamps must not be tightened so much that the two sides hit the hourglass-shaped block in the center, because it will stretch the clamp and make it less effective, requiring you to replace it. Pull off the nut on the band clamp and bend the ends of the clamp at the weld until the spot breaks apart. Then use a new clamp at the same angle as you did before.