How to Service the Front Brake Disc on 2005 Dodge Durango?

To perform front brake disc service, you must first lift the vehicle and take out the wheel and tire. Following this, cut out the caliper mounting bolts and detach the caliper from the steering knuckle, so that the brake hose does not hold up the caliper adapter while you remove it. Afterward, take off the disc from the hub/bearing wheel studs. With all-wheel antilock equipped models, check the tone wheel on the hub/bearing; any damage to the teeth requires replacing the whole assembly since the tone wheel is not fixed either separately or as a single unit. Put the new disc onto the hub/bearing wheel studs and then join the caliper adapter assembly, tightening the bolts to 176 Nm (130 ft. lbs.). After fitting and tightening the assembly, remove the vehicle's jack, drive it down slowly and use the brakes a couple of times to properly seat the pads before you start driving.

OEM 2005 Dodge Durango Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Discs found

View related parts
2005 Dodge Durango Brake Rotor, Rear Part Number: 52009968AD
$128.03 MSRP: $189.00
You Save: $60.97 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor; Rotor Brake Rear; Disc Brake Rotor
- Position: Rear
- Replaces: 52009968AA, 52009968AC
- Item Weight: 24.30 Pounds
- Item Dimensions: 14.0 x 14.3 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52009968AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Rotor, Front Part Number: 52010080AI
$179.01 MSRP: $269.00
You Save: $89.99 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Brake Rotor
- Position: Front
- Replaces: 52010080AB, 52010080AE, 52010080AC
- Item Weight: 26.70 Pounds
- Item Dimensions: 14.0 x 14.1 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52010080AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2005 Dodge Durango Brake Disc Parts and Q&A

Q: How to Service the Front Brake Disc on 2005 Dodge Durango?
A: To perform front brake disc service, you must first lift the vehicle and take out the wheel and tire. Following this, cut out the caliper mounting bolts and detach the caliper from the steering knuckle, so that the brake hose does not hold up the caliper adapter while you remove it. Afterward, take off the disc from the hub/bearing wheel studs. With all-wheel antilock equipped models, check the tone wheel on the hub/bearing; any damage to the teeth requires replacing the whole assembly since the tone wheel is not fixed either separately or as a single unit. Put the new disc onto the hub/bearing wheel studs and then join the caliper adapter assembly, tightening the bolts to 176 Nm (130 ft. lbs.). After fitting and tightening the assembly, remove the vehicle's jack, drive it down slowly and use the brakes a couple of times to properly seat the pads before you start driving.