Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
Limited, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2005 Dodge Durango HVAC Pressure Switch Parts and Q&A
Q: How to Service an HVAC Pressure Switch on 2005 Dodge Durango?
A: Before starting on the refrigerant pressure sensor/switch, take off and isolate the negative battery cable. After that, take out the connector from the HVAC pressure switch and cut off the wiring. Carefully take out the O-ring from the discharge line fitting. When setting up the HVAC, use the specified O-ring from special material for R-134a and the matching refrigerant oil required for the compressor. Put suitable refrigerant lubricant onto a new seal and fix it into the fitting of the discharge line. Fix the HVAC pressure switch onto the fitting, followed by connecting the wire harness connector to the switch. After finishing, attach the negative battery cable to its post once more.