JeepParts
My Garage
My Account
Cart
OEM 2005 Dodge Durango Heater Core
HVAC Heater Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Heater Cores found
2005 Dodge Durango Heater Core, Front Part Number: 5166114AB
$218.99 MSRP: $330.00You Save: $111.01 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Heater; HVAC Heater Core, Front; Core Heater Includes: Tubes, O - Rings, Seals, Clamps; Core Heater With Tubes And Seal; HVAC Heater Core
- Position: Front
- Replaces: 5166114AA
- Item Weight: 2.90 Pounds
- Item Dimensions: 22.7 x 11.0 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5166114AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2005 Dodge Durango Heater Core, Rear Part Number: 5134383AA
Product Specifications- Other Name: Core - Heater; HVAC Heater Core, Rear; Core Heater Includes: Plate, Screw; Core Heater; HVAC Heater Core
- Position: Rear
- Item Weight: 3.20 Pounds
- Item Dimensions: 16.6 x 13.3 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5134383AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2005 Dodge Durango Heater Core Parts and Q&A
- Q: How to Service a Rear Heater Core on 2005 Dodge Durango?A: If you want to service the rear heater core, first take out the rear HVAC housing and the rear blend door actuator. Clean the foam seal around the rear heater core and evaporator extension line flange. If it is deformed or damaged, replace it carefully with a new seal. After that, unscrew the fasteners joining the two halves of the rear heater core and evaporator extension line flange, then get rid of the outer part. Remove the screw at the back of the heater core tube retaining bracket and then take out the bracket. Very carefully remove the rear heater core from the rear HVAC housing. After placing the new or cleaned rear heater core in the back of the HVAC housing, make sure the insulator is correctly situated. Lock the rear heater core bracket onto the car using the screw, but tighten it to 2 N.m (17 in. lbs.). Reattach the outer half of the rear heater core and evaporator extension line flange, using screws that are tightened to 2 N.m (17 in. lbs.). Install the foam seal on the flange, put back the rear blend door actuator and then set in place the rear HVAC housing. Don't skip flushing the cooling system before reassembling after replacing the heater core.
Related 2005 Dodge Durango Parts
2005 Dodge Durango Blower Motor
2005 Dodge Durango Blend Door Actuator
2005 Dodge Durango Blower Motor Resistor
2005 Dodge Durango A/C Accumulator
2005 Dodge Durango A/C Clutch
2005 Dodge Durango A/C Compressor
2005 Dodge Durango A/C Expansion Valve
2005 Dodge Durango A/C Hose
2005 Dodge Durango A/C Service Cap
2005 Dodge Durango A/C Switch
2005 Dodge Durango Blower Control Switches
2005 Dodge Durango HVAC Pressure Switch