Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2005 Dodge Durango Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

  • 2005 Dodge Durango Blend Door Actuator - 4885206AB
    2005 Dodge Durango Blend Door Actuator - 4885206AB
    2005 Dodge Durango Blend Door Actuator Diagram - 4885206AB
    View related parts

    2005 Dodge Durango Door Actuator Part Number: 4885206AB

    $137.09 MSRP: $202.00
    You Save: $64.91 (33%)
    Product Specifications
    • Other Name: Actuator - A/C And Heater; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator; Servo; A/C and Heater Actuator with Bracket, Lever, and Recirculation Door.
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 1.9 x 3.6 x 4.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4885206AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Durango Submodels:
    • Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2005 Dodge Durango Blend Door Actuator Parts and Q&A

  • Q: How to Service the Blend Door Actuator and Motor on 2005 Dodge Durango?
    A: The first step to servicing the air door actuator and motor is to disconnect the negative battery cable to stop the air bag system and allow two minutes for the air bag capacitor to empty without risking sudden deployment. Undo the screws fastening the panel door and floor/defrost door actuators to the driver side of the HVAC housing and take out the HVAC connector from each actuator. Then, take out the mode door actuator(s) from the HVAC housing. Place the mode door actuator(s) at the driver side part of the HVAC, so that the actuator's output shaft links up with the linkage for the mode-air door. Following assembly, attach the panel door and floor/defrost door actuators to the HVAC housing using screws, set the torque at 2 N.m (17 in. lbs.). Attach the connector of the HVAC wire harness to the mode door actuator(s) and then place the negative battery cable back. In the end, start the Actuator Calibration process with help from a scan tool.

Related 2005 Dodge Durango Parts

Alternate Year Models

+
2004 Dodge Durango Blend Door Actuator 2006 Dodge Durango Blend Door Actuator