How to service an Oil Pressure Switch on 2005 Dodge Neon?

To service the oil pressure sender, raise the car and put an oil container under the sensor. Disconnect electricity connector and remove the switch. Reinstall the switch, reconnect the electrical connector, lower the vehicle, run the engine for 2 minutes and check and adjust the oil level as necessary.

OEM 2005 Dodge Neon Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2005 Dodge Neon Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2005 Dodge Neon Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2005 Dodge Neon?
A: To service the oil pressure sender, raise the car and put an oil container under the sensor. Disconnect electricity connector and remove the switch. Reinstall the switch, reconnect the electrical connector, lower the vehicle, run the engine for 2 minutes and check and adjust the oil level as necessary.