Is a Hub-Mounted Lathe Suitable for Machining Brake Discs on 2005 Jeep Grand Cherokee?

Machining the brake disc can be best done using an on-vehicle hub lathe because it turns the disc against the vehicle's hub where the disc is mounted. Scoring or wear on a brake disc can be repaired by machining both sides of the disc at the same time, using dual cutter heads on a lathe. Always clean the area on the mounting surface where you will attach the disc before placing it on the lathe, as a machining tool with only one side may create a tapered disc. Any brake discs that fail the minimum thickness requirements before or after machining should be replaced.

OEM 2005 Jeep Grand Cherokee Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Discs found

View related parts
2005 Jeep Grand Cherokee Rotor, Front Part Number: 52089269AB
$93.65 MSRP: $239.00
You Save: $145.35 (61%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Item Weight: 26.20 Pounds
- Item Dimensions: 2.1 x 13.4 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52089269AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2005 Jeep Grand Cherokee Rotor, Rear Part Number: 52089275AB
$66.15 MSRP: $166.00
You Save: $99.85 (61%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Item Weight: 20.30 Pounds
- Item Dimensions: 3.0 x 13.3 x 12.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52089275AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2005 Jeep Grand Cherokee Brake Disc Parts and Q&A

Q: Is a Hub-Mounted Lathe Suitable for Machining Brake Discs on 2005 Jeep Grand Cherokee?
A: Machining the brake disc can be best done using an on-vehicle hub lathe because it turns the disc against the vehicle's hub where the disc is mounted. Scoring or wear on a brake disc can be repaired by machining both sides of the disc at the same time, using dual cutter heads on a lathe. Always clean the area on the mounting surface where you will attach the disc before placing it on the lathe, as a machining tool with only one side may create a tapered disc. Any brake discs that fail the minimum thickness requirements before or after machining should be replaced.