How to Service a Yaw Sensor on 2005 Jeep Grand Cherokee?

To service the Yaw Rate Sensor, remove the center console and disconnect electrical connector 3 from dynamics sensor 1. Remove the two securing nuts, take out the sensor, then reinstall it, reconnect the electrical connector, secure with the nuts, and reinstall the floor console.

OEM 2005 Jeep Grand Cherokee Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2005 Jeep Grand Cherokee Stab Control Module Part Number: 56044148AA
Product Specifications
- Other Name: Module - Dynamics; Electronic Stability System Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate; Module Electronic Stability
- Item Weight: 1.20 Pounds
- Item Dimensions: 3.8 x 3.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56044148AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Grand Cherokee Submodels:
- Laredo, Limited | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2005 Jeep Grand Cherokee Yaw Sensor Parts and Q&A

Q: How to Service a Yaw Sensor on 2005 Jeep Grand Cherokee?
A: To service the Yaw Rate Sensor, remove the center console and disconnect electrical connector 3 from dynamics sensor 1. Remove the two securing nuts, take out the sensor, then reinstall it, reconnect the electrical connector, secure with the nuts, and reinstall the floor console.