Can a Scored or Worn Brake Disc Be Machined on 2006 Jeep Grand Cherokee?

If the disc on your disc brake system is worn or scored, refine it with a hub mounted lathe, since this fixes the disc to the precise vehicle hub/bearing. The disc and its hub should be machined by two offset cutters at the same time and the surface where it mounts must be clean before installing it on the lathe. If a machine has only one side on it, there is a risk the disc will be tapered. If brake discs are less thick than the minimum standard before or after being machined, they have to be replaced.

OEM 2006 Jeep Grand Cherokee Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Discs found

View related parts
2006 Jeep Grand Cherokee Rotor, Front Part Number: 52089269AB
$93.65 MSRP: $239.00
You Save: $145.35 (61%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Item Weight: 26.20 Pounds
- Item Dimensions: 2.1 x 13.4 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52089269AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Grand Cherokee Rotor, Front Part Number: 5290733AB
$268.52 MSRP: $399.00
You Save: $130.48 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Brake Rotor
- Position: Front
- Replaces: 5290733AA
- Item Weight: 30.20 Pounds
- Item Dimensions: 14.7 x 14.7 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290733AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Rotor, Rear Part Number: 52089275AB
$66.15 MSRP: $166.00
You Save: $99.85 (61%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Item Weight: 20.30 Pounds
- Item Dimensions: 3.0 x 13.3 x 12.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52089275AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Rotor, Rear Part Number: 5290731AB
$137.09 MSRP: $202.00
You Save: $64.91 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 5290731AA
- Item Weight: 24.80 Pounds
- Item Dimensions: 14.0 x 14.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290731AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2006 Jeep Grand Cherokee Brake Disc Parts and Q&A

Q: Can a Scored or Worn Brake Disc Be Machined on 2006 Jeep Grand Cherokee?
A: If the disc on your disc brake system is worn or scored, refine it with a hub mounted lathe, since this fixes the disc to the precise vehicle hub/bearing. The disc and its hub should be machined by two offset cutters at the same time and the surface where it mounts must be clean before installing it on the lathe. If a machine has only one side on it, there is a risk the disc will be tapered. If brake discs are less thick than the minimum standard before or after being machined, they have to be replaced.