How to Remove and Install a MAP Sensor on 2005 Jeep Wrangler?

To change or install the Manifold Absolute Pressure (MAP) sensor, it has to be removed from behind the intake manifold by following special steps. Take down the electrical connector from the sensor before handling the sensor area. After that, take out the screw from the sensor, since its head is TORX and then pull out the MAP sensor from the intake manifold. While you're doing this, examine the O-ring on the sensor to ensure it isn't broken. Clean the MAP sensor housing area in the intake manifold and make sure the O-ring doesn't have any rips or holes. Push the sensor into the manifold and screw it into position, making sure the torque is 3 N.m (25 in.lbs.). At this point, attach the electrical harness.

OEM 2005 Jeep Wrangler MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2005 Jeep Wrangler M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Wrangler Submodels:
- SE | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2005 Jeep Wrangler M.A.P. Sensor Part Number: 68430082AA
$140.49 MSRP: $212.00
You Save: $71.51 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Pressure Sensor; MAP Sensor
- Replaces: 56044544AB, 56044544AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68430082AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4.0L V6, 6 Cyl 4.0 L GAS

2005 Jeep Wrangler MAP Sensor Parts and Q&A

Q: How to Remove and Install a MAP Sensor on 2005 Jeep Wrangler?
A: To change or install the Manifold Absolute Pressure (MAP) sensor, it has to be removed from behind the intake manifold by following special steps. Take down the electrical connector from the sensor before handling the sensor area. After that, take out the screw from the sensor, since its head is TORX and then pull out the MAP sensor from the intake manifold. While you're doing this, examine the O-ring on the sensor to ensure it isn't broken. Clean the MAP sensor housing area in the intake manifold and make sure the O-ring doesn't have any rips or holes. Push the sensor into the manifold and screw it into position, making sure the torque is 3 N.m (25 in.lbs.). At this point, attach the electrical harness.