How to Remove and Install a MAP Sensor on 2006 Jeep Wrangler?

The Manifold Absolute Pressure (MAP) sensor is at the back of the intake manifold and should be removed and installed using specific steps. First, remove the power connector from the sensor and after that, clean the region around it. After that, use a TORX head tool to remove the screw holding the sensor, then pull out the MAP sensor from the intake manifold and verify the O-ring. Start by cleaning the hole for the sensor, inspecting the O-ring on the sensor, positioning it into the manifold and putting the mounting screws in at 3 N.m (25 in. lbs.) torque.

OEM 2006 Jeep Wrangler MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2006 Jeep Wrangler M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- SE | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2006 Jeep Wrangler M.A.P. Sensor Part Number: 68430082AA
$140.49 MSRP: $212.00
You Save: $71.51 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Pressure Sensor; MAP Sensor
- Replaces: 56044544AB, 56044544AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68430082AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4.0L V6, 6 Cyl 4.0 L GAS

2006 Jeep Wrangler MAP Sensor Parts and Q&A

Q: How to Remove and Install a MAP Sensor on 2006 Jeep Wrangler?
A: The Manifold Absolute Pressure (MAP) sensor is at the back of the intake manifold and should be removed and installed using specific steps. First, remove the power connector from the sensor and after that, clean the region around it. After that, use a TORX head tool to remove the screw holding the sensor, then pull out the MAP sensor from the intake manifold and verify the O-ring. Start by cleaning the hole for the sensor, inspecting the O-ring on the sensor, positioning it into the manifold and putting the mounting screws in at 3 N.m (25 in. lbs.) torque.