Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Chrysler Pacifica Dimmer Switch

Light Dimmer Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Dimmer Switches found

  • 2006 Chrysler Pacifica Dimmer Switch - 5082025AC
    2006 Chrysler Pacifica Dimmer Switch Diagram - 5082025AC
    View related parts

    2006 Chrysler Pacifica Turn Signal Switch Part Number: 5082025AC

    Product Specifications
    • Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Switch Multifunction
    • Item Weight: 0.90 Pounds
    • Item Dimensions: 9.8 x 4.6 x 2.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5082025AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Chrysler Pacifica Submodels:
    • Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
  • 2006 Chrysler Pacifica Dimmer Switch - 4685956AC
    2006 Chrysler Pacifica Dimmer Switch Diagram - 4685956AC
    View related parts

    2006 Chrysler Pacifica Turn Signal Switch Part Number: 4685956AC

    Product Specifications
    • Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Switch Multifunction
    • Item Weight: 1.00 Pounds
    • Item Dimensions: 9.3 x 5.2 x 3.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4685956AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Chrysler Pacifica Submodels:
    • Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS

2006 Chrysler Pacifica Dimmer Switch Parts and Q&A

  • Q: How to Service the Left Dimmer Switch on 2006 Chrysler Pacifica?
    A: First, remove the negative cable from the battery before starting the service. Take out the steering column shrouds at the bottom and top and afterwards disconnect the instrument panel wire harness connector from the switch. The next job is to remove the two screws that hold the left multi-function switch to the housing and pull the switch out of both the column and the vehicle. To install, place the left multi-function switch in the housing and turn in the two screws until they reach 2.5 Nm (22 in. lbs.) before tightening them. Put back the wiring harness onto the panel gauge and connect it to the switch. Reinstall the two shrouds of the steering column with bolts torqued up to 1.9 Nm (17 in. lbs.). In the last step, join the battery's negative cable and make sure both the vehicle and its system are operating properly.

Related 2006 Chrysler Pacifica Parts

Alternate Year Models

+
2005 Chrysler Pacifica Dimmer Switch 2007 Chrysler Pacifica Dimmer Switch