Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Right; Arm Front Wiper; Arm Wiper
Position: Passenger Side
Item Weight: 2.20 Pounds
Item Dimensions: 20.0 x 3.7 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5127362AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Chrysler PT Cruiser Submodels:
Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
2006 Chrysler PT Cruiser Wiper Arm Parts and Q&A
Q: How to Service and Repair Front Wiper Arms on 2006 Chrysler PT Cruiser?
A: When servicing the wiper arms, set the wiper arm blades in PARK, shut off the ignition and open the hood. Gently lift the wiper arm nut cap with a trim stick (special tool #C-4755) or the equivalent tool and then remove it. Then, take off the nut that holds the arm to the arm pivot and while the arm is in an over/centered position, pull or rock it away. Gently remove any metal fragments from the center pivot shafts. Before fitting the wipers, verify that the module is in park mode by firstly using the system completely. Have the driver's wiper blade end at the same height as the windshield's park mark, raising or lowering it to meet the passenger blade. First, locate the arm on the pivot with its over/centered position facing you, attach the retaining nut and tighten it to 21 N.m (190 in. lbs.). After that, place the wiper arm nut cap and close the hood.