Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Dodge Durango Air Bag Sensor

Air Bag Impact Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

  • 2006 Dodge Durango Air Bag Sensor - 5084000AA
    2006 Dodge Durango Air Bag Sensor Diagram - 5084000AA
    View related parts

    2006 Dodge Durango Air Bag Sensor Part Number: 5084000AA

    $202.38 MSRP: $287.00
    You Save: $84.62 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Air Bag; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Air Bag
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 1.8 x 2.7 x 3.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5084000AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Dodge Durango Submodels:
    • Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
  • 2006 Dodge Durango Air Bag Sensor - 56043168AA
    2006 Dodge Durango Air Bag Sensor Diagram - 56043168AA
    View related parts

    2006 Dodge Durango Side Impact Sensor Part Number: 56043168AA

    Product Specifications
    • Other Name: Sensor - Side Airbag Impact; Air Bag Sensor; Side Sensor; Sensor Side Airbag Impact
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 3.1 x 1.0 x 1.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 56043168AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2006 Dodge Durango Submodels:
    • Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Dodge Durango Air Bag Sensor Parts and Q&A

  • Q: How to Service an Air Bag Sensor for Front Impact on 2006 Dodge Durango?
    A: To start the service of the front impact sensor, cut off the negative battery cable, wait two minutes for the system capacitor to discharge and then proceed. Remove the screw on the front impact sensor that is connecting it to the back of the radiator support vertical member. After that, undo the connectors linking the headlamp and dash wire harness from the sensor receptacle. Take care to remove the front impact sensor from inside the engine compartment. For installation, place the new sensor at the bottom of the engine compartment and then link the headlamp and dash wire harness to it. Place the sensor on the vertical member of the radiator support, so the pin locks into the lower clearance hole on the sensor. Fasten the securing screw to 6 N.m (55 in. lbs.) during the installation. You should not reconnect the negative cable on the battery until after the supplemental restraint system verification test is complete, following any repair or replacement of a supplemental restraint system part.

Related 2006 Dodge Durango Parts

Alternate Year Models

+
2005 Dodge Durango Air Bag Sensor 2007 Dodge Durango Air Bag Sensor