How to Maintain an Ambient Temperature Sensor on 2006 Jeep Commander?

Before servicing the ambient air temperature sensor, disconnect and separate the negative battery cable. Release the grille and take the connector out of the ambient air temperature sensor at the top of the front bumper beam. Press the sensor's release tab and pull it out. The ambient air temperature sensor should be sat on the top of the front bumper beam, with all tabs being securely connected. Attach the wire harness connector to the sensor, fit the grille back into place and then link the negative battery cable.

OEM 2006 Jeep Commander Ambient Temperature Sensor

Inside Outside Auto Thermometer Gauge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ambient Temperature Sensor found

View related parts
2006 Jeep Commander Temperature Sensor, Front Part Number: 68518243AA
$47.14 MSRP: $69.85
You Save: $22.71 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Ambient Temperature; Air Temp, Front; Battery Temp; Coolant Temp.; Ambient Temperature Sensor; Air Temperature Sensor; Temperature Sending Unit; Sentinel Sensor
- Position: Front
- Replaces: 5149025AA, 5149265AB, 56042395
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.2 x 2.0 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68518243AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Ambient Temperature Sensor Parts and Q&A

Q: How to Maintain an Ambient Temperature Sensor on 2006 Jeep Commander?
A: Before servicing the ambient air temperature sensor, disconnect and separate the negative battery cable. Release the grille and take the connector out of the ambient air temperature sensor at the top of the front bumper beam. Press the sensor's release tab and pull it out. The ambient air temperature sensor should be sat on the top of the front bumper beam, with all tabs being securely connected. Attach the wire harness connector to the sensor, fit the grille back into place and then link the negative battery cable.